Northern California San Francisco, Oakland, Sacramento, San Jose, Pleasanton, etc.

Fresno area!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 14, 2007 | 03:33 PM
  #1  
DOCSG35's Avatar
Thread Starter
|
Registered User
Joined: Oct 2005
Posts: 357
Likes: 0
From: Texas
Thumbs up Fresno area!

Just bought the HKS catback exhaust system for my G coupe.

Does anyone know of any reputable shops or muffler shops in the Fresno area where I can get it installed??

Thanks.
 
Reply
Old Aug 14, 2007 | 03:41 PM
  #2  
Kris79's Avatar
battle froggy
iTrader: (56)
Joined: Apr 2006
Posts: 11,991
Likes: 4
its a super easy install. 1 hour and a six pack and u can do it yourself. or any autoshop can install it and not mess up unless they are retards.
 
Reply
Old Aug 15, 2007 | 02:42 PM
  #4  
DOCSG35's Avatar
Thread Starter
|
Registered User
Joined: Oct 2005
Posts: 357
Likes: 0
From: Texas
Exactly how easy is the install and how long would it take me?

I'm not too mechanically inclined, and wouldn't mind paying $50 to $100 to have it professionally installed at a muffler shop.

Thanks.
 
Reply
Old Aug 15, 2007 | 09:48 PM
  #5  
Kris79's Avatar
battle froggy
iTrader: (56)
Joined: Apr 2006
Posts: 11,991
Likes: 4
Originally Posted by DOCSG35
Exactly how easy is the install and how long would it take me?

I'm not too mechanically inclined, and wouldn't mind paying $50 to $100 to have it professionally installed at a muffler shop.

Thanks.
here are the steps.

1 go to 711 get a 6-12 pack of beer
2 go home and put beer in in fridge wait till cold
3 get beer out of fridge and bring to garage
4 put car on park and stopers in front
5 jack up car( only really need to jack up the rears since you can shimmy your way to the middle)
6 open beer and congratulate yourself for jacking up your car, you are 25% done
7 go under car and loosen any bolts (do no take off bolts yet) on your car from cat and back
8 take off bolts from your cat to your ypipe and ypipe to your mide pipe, since those arnt held by hangers its easy to start there. remove ypipe and set aside
9 proceed to remove mid pipe bolts then hangers and set aside
10 then remove rear section off the three hangers, if your solo and dont want toscratch up your stock tips use old boxes or some cloth and wrap your tips
11 put all stock parts in a nice neat area and drink another beer
12 now to put your hks on just do the reverse steps and your done. btw when installing your hks the tips arnt going to match up so dont fully tighten all the bolts till the tips are how you like it. also pb blaster will help with rusted on bolts and removing the stock hangers.
13 drink rest of beer and post pictures on g35driver.com
 
Reply
Old Aug 15, 2007 | 09:51 PM
  #6  
Kris79's Avatar
battle froggy
iTrader: (56)
Joined: Apr 2006
Posts: 11,991
Likes: 4
another tip wipe down the tips of the hks before you start the car. i would recommend wiping it down with alcohol so when it heats up u dont see burned on finger prints
 
Reply
Old Aug 15, 2007 | 11:23 PM
  #7  
DOCSG35's Avatar
Thread Starter
|
Registered User
Joined: Oct 2005
Posts: 357
Likes: 0
From: Texas
Thanks for the advice man! I'll let you know how everything turns out. Can't wait!!!!!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM
Ninjay16
Engine - Intake/Fuel
7
Jan 14, 2016 01:44 AM
AJC128
New Members Check In
1
Nov 1, 2015 11:55 AM
Visionnn
Buying, Selling & Leasing Discussion
17
Oct 3, 2015 05:16 AM
gqraverice
20 Inch
0
Sep 29, 2015 05:39 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:28 PM.