A Titan 5.6L V8 in a G35?
#16
#21
#22
If you're going to do a swap, do this:
https://g35driver.com/forums/engine-...0z-begins.html
Basically, what he said:
https://g35driver.com/forums/engine-...0z-begins.html
Basically, what he said:
#23
Join Date: Dec 2005
Location: San Antonio, TX
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
the vk56 swap is not as expensive as some my think all be it you have to get the motor first but you can retain the 6spd that comes in the G/350 by getting the adapter plate that is sold. i am starting to get parts together to do this build myself. you keep the engine harness from the vk and it should fit up to the Gecu however will still run a utec piggy back for tuning purposes. it fits in the engine bay but you can buy prefab brakets for new engine mounts. i am opting for this route over a built vq35 and TT. if you raise compression, change cams and a few other things i will pull 500whp out of a solid block. plus it will be more reliable for a DD than FI!!!
Thread
Thread Starter
Forum
Replies
Last Post