Engine Bay Pics*Post here*
yeah I had problems with the GTSpec bar install as well...you get one side in then tried putting the bolt on the other side and it just wouldnt work...I had to use a screwdriver to bend it enough to actually allow some movement/wiggle room to put the bolt through. ohhwell...Anyways does anyone recommend anything in my engine bay besides what I posted?
Originally Posted by k67p67
The NRG STB is a tight fit in the brackets. The added thickness of the powdercoat would likely pose a problem when installing/removing the bar. You'd probably end up chipping the powder. I had to touch-up my brackets many times when I scraped off some paint during installation/removal of the bar and the paint isn't as thick as powdercoat.
New pic, sorry for the dirty bay gotta clean it + iphone pic
comming soon:
Longer bolts so i can put the red washers in the center of plenum
A top secret project for my stillen intake, never been done before
New radiator hoses and possibly front hose delete
CF battery covers(just the detachable pieces)
Polished TB from sean
comming soon:
Longer bolts so i can put the red washers in the center of plenum
A top secret project for my stillen intake, never been done before
New radiator hoses and possibly front hose delete
CF battery covers(just the detachable pieces)
Polished TB from sean
looks good Shane...let me know what size bolts you put in there....I have the blue washers for my engine bay going on soon...just have to change all the bolts up...we dont have an ACE hardware around...
