Engine Bay Pics*Post here*
#2716
The following 3 users liked this post by Lartytiejdke3:
#2717
#2718
I just did a engine control harness wire tuck. Painted valve covers, timing chain. Now it's time for the other goodies. Who is a good source for a variety of engine bay pieces. Like oil cap. I see everybody with Nismo, the one with a Z on it and mirror shiny plain chrome. Surely there are other ootions? I don't really want to spend a fortune but I would like to add some sleeving for coolant and vacuum lines. Replace power steering, coolant reservoir s with something.
#2719
pcv valve fitting
hi, i have a question about your set up on the pcv valve. i have the earl an fitting but i was wondering how did you get your oem pcv valve to fit in there. your setting of the hose looks exactly like mine but i dont know how to put the male part of the pcv valve into the an fitting. any help would be greatful and thanks
Been working on cleaning up the front of the motor for a long while, now its finally time to show it off.
Before
After
Latest round of mods:
Koyo V-Core 36mm Aluminum Racing Radiator (for the 350z)
Forged racing slim fan shroud - polished
Earl's Transmission Cooler w/ custom RRDYE bracket, braided hoses and AN fittings
Polished Thermostat
Polished Unorthodox Racing Idler Pulley
Polished Unorthodox Racing Alternator Pulley
Modified, welded and Chrome coolant pipes (driver/passenger sides - deleted coolant hose that runs across the timing cover)
Various braided hoses and polished clamps
PCV valve converted to AN fitting
A couple more polished bolts
HUGE thanks to all who helped: RRYDE, OH6 G35, Dave's Garage, bigc, Marty_G, and sammy_G
Tranny lines converted to AN (a very tedious task, thanks RRYDE!)
Forged Racing fan shroud and Koyo Radiator
UR Alternator Pulley
UR Idler Pulley
AN fitting on PCV valve
Polished thermostat
So much room now
Its done for now, but we all know there is no such thing as done. Future plans are to powdercoat my sway bars and paint my core support.
Before
After
Latest round of mods:
Koyo V-Core 36mm Aluminum Racing Radiator (for the 350z)
Forged racing slim fan shroud - polished
Earl's Transmission Cooler w/ custom RRDYE bracket, braided hoses and AN fittings
Polished Thermostat
Polished Unorthodox Racing Idler Pulley
Polished Unorthodox Racing Alternator Pulley
Modified, welded and Chrome coolant pipes (driver/passenger sides - deleted coolant hose that runs across the timing cover)
Various braided hoses and polished clamps
PCV valve converted to AN fitting
A couple more polished bolts
HUGE thanks to all who helped: RRYDE, OH6 G35, Dave's Garage, bigc, Marty_G, and sammy_G
Tranny lines converted to AN (a very tedious task, thanks RRYDE!)
Forged Racing fan shroud and Koyo Radiator
UR Alternator Pulley
UR Idler Pulley
AN fitting on PCV valve
Polished thermostat
So much room now
Its done for now, but we all know there is no such thing as done. Future plans are to powdercoat my sway bars and paint my core support.
#2720
#2721
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
09-06-2023 10:07 AM
Thebaws11
G35 Coupe V35 2003 - 07
8
11-30-2016 12:54 PM