06 Projector headlight Install
so are the factory bulbs for the 06 projectors 4200k or 4300k? just want to confirm what was said above.
I also bought a pair of 06 projectors, but does anyone know what the diff is between the recalled ones and the 2nd gen ones?..other than the cutoff and light brightness? Is there a diff. serial number or any other physical evidence on the assembly that's different?
I also bought a pair of 06 projectors, but does anyone know what the diff is between the recalled ones and the 2nd gen ones?..other than the cutoff and light brightness? Is there a diff. serial number or any other physical evidence on the assembly that's different?
Originally Posted by ratedxmarcel
8000k in the 05 projectors??? what the hell are you talking about, Also your simply stating something I already know. The ceramic shield on the bulbs aka "Glare Strip" D2R bulbs are still in the stock 05 NON projector Headlights.
PS: This IS a compairison of the stock D2R vs D2S HIDS....I actually haven't installed the 8000K bulbs yet so I was fibbing a bit hahaha people believe anything they read on the internet I swear. Funny how you act like you know what your talking about, I just took these shots on the Tungsten WB setting in my camera so the lights would appear to have a blueish light output.
PS: This IS a compairison of the stock D2R vs D2S HIDS....I actually haven't installed the 8000K bulbs yet so I was fibbing a bit hahaha people believe anything they read on the internet I swear. Funny how you act like you know what your talking about, I just took these shots on the Tungsten WB setting in my camera so the lights would appear to have a blueish light output.
You are still too close to the wall to make any type of comparison, and you still haven't proven that the 05's have glare issues. They don't, the light leakage above the cutoff is minimal. Anyone who's seen an 03-05 coupe will tell you that they don't glare in stock form. I did make an assumption that you put d2s bulbs in both, but based on your deceptive pics, it was a perfectly logical assumption, the stock bulb output looks nothing like the pics you took, they are very white without any hint of blue. So good job on not proving anything with your "comparison"
Originally Posted by gwhizz35
so are the factory bulbs for the 06 projectors 4200k or 4300k? just want to confirm what was said above.
I also bought a pair of 06 projectors, but does anyone know what the diff is between the recalled ones and the 2nd gen ones?..other than the cutoff and light brightness? Is there a diff. serial number or any other physical evidence on the assembly that's different?
I also bought a pair of 06 projectors, but does anyone know what the diff is between the recalled ones and the 2nd gen ones?..other than the cutoff and light brightness? Is there a diff. serial number or any other physical evidence on the assembly that's different?
Originally Posted by G35Pinoy
uhmmm might be stupid but i wanna change out the bulbs...is it hard to change bulbs out...jw....i kinda did it for my 05 but ehhh
Thread Starter
|
Registered User
Joined: Oct 2005
Posts: 593
Likes: 0
From: SIN CITY
Originally Posted by gwhizz35
ratedx...so with the 06 projectors, you used the regular oem D2S bulb?
are these the recalled projectors?...or are they the 2nd gen?
are these the recalled projectors?...or are they the 2nd gen?
Thread Starter
|
Registered User
Joined: Oct 2005
Posts: 593
Likes: 0
From: SIN CITY
Originally Posted by redlude97
So good job on not proving anything with your "comparison"
PS: I Just ordered Bats Smoked GTR style overlays, So hopefully have some new pics up soon.
Quick answer: No
You only need to remove the screws/bolts on the side of the bumper to pull it down a bit. However, I would recommend taking off the bumper, as it is easier to put back on.
`John
You only need to remove the screws/bolts on the side of the bumper to pull it down a bit. However, I would recommend taking off the bumper, as it is easier to put back on.
`John
Originally Posted by Dem1K
Quick answer: No
You only need to remove the screws/bolts on the side of the bumper to pull it down a bit. However, I would recommend taking off the bumper, as it is easier to put back on.
`John
You only need to remove the screws/bolts on the side of the bumper to pull it down a bit. However, I would recommend taking off the bumper, as it is easier to put back on.
`John
If only I knew how to color-mod them :\
Thread
Thread Starter
Forum
Replies
Last Post
