Former G35driver Vendor
Good luck on the camber setup bro and please post pics when possible
Registered User
Quote:
he always pretends to bash
other cars for having the same parts as his car 
OP, get your rims mounted soon!!!
LOL!!Originally Posted by xx7sephiroth7xx
lol, i think 10 dg coupe owners should copy calvin's set up (temporarily & unbeknownst to calvin) for one photo shoot so calvin thinks his ride won't be unique anymore he always pretends to bash
other cars for having the same parts as his car OP, get your rims mounted soon!!!
Rob, most of the camber kits out there will let you achieve the -4.0 camber you're looking for. Calvin has the SPC kit, I slammed his car all the way down front and rear, even with the camber kit pushed all the way to max the camber was still at -3.0+ (not using the spacers) so -4.0 would be easy.
-GP-
-GP-
Quote:
-GP-
Yea I should find out within the next couple of days. I have to use 25 mm spacers just to fit the front wheels since Disc I used wont fit the Brembo's. The Rears are on and fit within a mm of the brake, just perfect! I talked to SPC and they said if I reverse the ball joint on top, then ill be able to acheive almost -5 degrees of camber, so we'll see how drastc ill have to go. With the spacers up front, my offset will be -12 up front. It doesnt sound badd as it seems...trust me....but soon we will know, hopefully by 2moro night.....Originally Posted by Gdup35sedan
Rob, most of the camber kits out there will let you achieve the -4.0 camber you're looking for. Calvin has the SPC kit, I slammed his car all the way down front and rear, even with the camber kit pushed all the way to max the camber was still at -3.0+ (not using the spacers) so -4.0 would be easy.-GP-
sounds good, there's always a way to make it fit. I dont even think you'll need to reverse the ball joint. You should be able to get atleast -4.5 with the arms maxed out on the negative side.
-GP-
-GP-
Quote:
-GP-
when i was slammed, i have at -3.5 Originally Posted by Gdup35sedan
Rob, most of the camber kits out there will let you achieve the -4.0 camber you're looking for. Calvin has the SPC kit, I slammed his car all the way down front and rear, even with the camber kit pushed all the way to max the camber was still at -3.0+ (not using the spacers) so -4.0 would be easy.-GP-
now that we've lifted it, i can't get get any closer than -3.1 and -2.9
