Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]
shane, that is actually one of my favorite shots because it shows the poke well. i wouldnt expect someone with your fitment taste to like what i have. my last fitment was probably closer to your style since it was just flush and camber, no poke. but let me remind you, that phase of fitment had already infected me before i started fitting the Auto coutures in 08
my buddy tee's 335 19x10.5/12.5
levon's stepped + reverse lips
my miata 18x9 armands mr2 18x10 19x12.5
agi of luxury abstract 19x11.5 19x12
kbreak ufc? looks like 19x12 or 19x11.5 with 275/30
y33 with also 275/30/19 on 11.5 or 12. toyo's run skinny so its hard to tell on pictures.
everybody gets styling cues from different sources. everybody goes thru changes in what they like or we would keep the same thing forever. these are the cars that i found were most attractive at the point i am at.
aggressive poke as someone on air would be yet handles as good as static.
my buddy tee's 335 19x10.5/12.5
levon's stepped + reverse lips
my miata 18x9 armands mr2 18x10 19x12.5
agi of luxury abstract 19x11.5 19x12
kbreak ufc? looks like 19x12 or 19x11.5 with 275/30
y33 with also 275/30/19 on 11.5 or 12. toyo's run skinny so its hard to tell on pictures.
everybody gets styling cues from different sources. everybody goes thru changes in what they like or we would keep the same thing forever. these are the cars that i found were most attractive at the point i am at.
aggressive poke as someone on air would be yet handles as good as static.
Former G35driver Vendor
iTrader: (84)
No poke? Not very familiar with my setup, unless you're referring to my bbs?
I was pretty much the only one running a setup where my wheels didn't tuck on compression(As far as what I saw)
No poke??
It looks legit from profile and front but kinda has an awkward penguin look from the rear. Although rear pics with poke like that are more unflattering than how it looks in person so I gotta take that into consideration. But I feel it'd still look/flow better with about -15 mm
I was pretty much the only one running a setup where my wheels didn't tuck on compression(As far as what I saw)
No poke??
It looks legit from profile and front but kinda has an awkward penguin look from the rear. Although rear pics with poke like that are more unflattering than how it looks in person so I gotta take that into consideration. But I feel it'd still look/flow better with about -15 mm
Last edited by ShanesG; 08-18-2012 at 11:28 PM.
The following users liked this post:
ShanesG (08-18-2012)
The following users liked this post:
Frankieg35 (08-19-2012)
Guest
Posts: n/a
The following users liked this post:
GR6RR (08-20-2012)
The following 4 users liked this post by 4DGS:
We're all playing the same sport in this fitment game, what's it really matter if one guy is a point guard and you're a forward, we all tryin to put the ball in the hoop one way or another
My bumper is fcked, big cracks everywhere was hit n run by some old lady, luckily Eric @ BausAuto took care of it sent my bodyshop a new inven thats getting put on next week
What size spacer you guys think would fit right on the front, I wanna fill in that gap and have it look like my rear, 10mm or 5mm ?
My bumper is fcked, big cracks everywhere was hit n run by some old lady, luckily Eric @ BausAuto took care of it sent my bodyshop a new inven thats getting put on next week
What size spacer you guys think would fit right on the front, I wanna fill in that gap and have it look like my rear, 10mm or 5mm ?
^
well the way it is right now cuz of all the bottoming out ya it looks like ****, the lip itself is hanging on to dear life i just retaped it with hurricane tape.. i like it white, gonna redo it the same way, gives it the appearance of lookin like a real lip and also the bumper actually looking lower....
besides I'm the dude that brought the HD lip to this forum, that oughtta give some wiggle room to do it a bit different
but i messed around with 5mm spacers before for the rear of my old wheels, they made no difference i ended up swapping them for 10's... i guess ill try on both, see which works without problems....
which 5mm spacer would you recommend that can help me stay hubcentric though ?
havent messed around with spacers in a long time, forgot which brands offer what
well the way it is right now cuz of all the bottoming out ya it looks like ****, the lip itself is hanging on to dear life i just retaped it with hurricane tape.. i like it white, gonna redo it the same way, gives it the appearance of lookin like a real lip and also the bumper actually looking lower....
besides I'm the dude that brought the HD lip to this forum, that oughtta give some wiggle room to do it a bit different
but i messed around with 5mm spacers before for the rear of my old wheels, they made no difference i ended up swapping them for 10's... i guess ill try on both, see which works without problems....
which 5mm spacer would you recommend that can help me stay hubcentric though ?
havent messed around with spacers in a long time, forgot which brands offer what