Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]
#5658
#5659
Yeah already put the stiffer springs on on and it's at full stiff... I noticed a pretty good difference, but I still need to take it to work cos there's a few dips that I can test out, but it's goin up driveways that really causes most of the scraping. I was thinkin half a degree but then I think the front of the wheel would hit the fender..i'm still thinkin maybe 1 degree would be cool. Too lazy to think about doin the math right now lol
#5660
#5663
Is it rubbing on the side marker bracket? If so, I had part of mine cut off and it minimized the rubbing alot. Or if it's the fender covers, well, I just removed mine lol...but only cos they're really tore up.
Did some math...these are only approximations based on my front...If I camber .75 degrees, I get about 5mm clearance. That should be enough. I think 1.5 would be too much, I'd need a spacer, and I'd rather not run a spacer..would be a 3mm or 5mm one any way.
Did some math...these are only approximations based on my front...If I camber .75 degrees, I get about 5mm clearance. That should be enough. I think 1.5 would be too much, I'd need a spacer, and I'd rather not run a spacer..would be a 3mm or 5mm one any way.
#5666
Really? I still don't understand this and i am the most hated person in this thread, but wtf?! What is the point of putting a rim on your car that is so wide you cant put a tire on it to fit? Why don't you guys just buy like 19x11.0 and put bicycle tires on them? Pretty much the same thing...
my friend, we don't buy wheels that we CAN'T fit tires around, we stretch the tires to fit the wheel in, its not that we CAN'T fit a tire on it, and please it's one thing to disagree but another to mock