SxExCx's Polished Plenum Installed
There is nothing wrong with attention to detail especially if you are going to be popping the hood for people. I say money well spent. 
Your bay looks excellent and very close to what I am going to end up with except in blue. Props to SxExCx for a great product as always. I will be ordering mine down the road from you.
Oh and Boston, when you get your other intake tube hit me up about your polished Z-tube! I will take it off your hands!
Your bay looks excellent and very close to what I am going to end up with except in blue. Props to SxExCx for a great product as always. I will be ordering mine down the road from you.Oh and Boston, when you get your other intake tube hit me up about your polished Z-tube! I will take it off your hands!
Originally Posted by Boston
I've gotten quite a few questions about the plenum bolts I used. I got them from a local hardware store and they are called "M6 socket cap bolts". I used the same length bolts as listed in the Motordyne install guide which for me was (11) 35MM, (3) 55MM and (4) 70MM. I have a 5/16 plenum spacer so the bolt lengths will vary depending on the size of spacer. If you're completely OEM, the bolt lengths should be listed in the service manual.
The JDM fender washers that I used are compatible with the M6 socket cap bolts. Hope this helps.
The JDM fender washers that I used are compatible with the M6 socket cap bolts. Hope this helps.
You only need one set of the JDM / Ebay washers if you're just doing the 6 bolts in the center of plenum. You also only need three (3) 55MM and three (3) 70MM M6 socket cap bolts if you're just doing those 6 bolts in the plenum.
haha i actually just ordered my own polished plenum from sxexcx today! i saw his fender washers on his and love them. but i am in the process of dressing up my engine bay. next step is a strut bar...