also you might want to consider modifying the kenstyle front and removing the lower bar in the middle........a few people have done this, better air flow

 

wheels are exactly like mine

 

looks nice

 

I like the simplicity of the stillen SC, and the hood is starting to grow on me too.


Correct me if im wrong, but the stillen because it is a bolt on basically does not require tuning, where as a vortech would require someone skilled and familiar with the vortech to install it?

 

The vortech is basically tuned. If I choose to, I could just leave it as is. It comes with all the electrical needs to provide stable tuning. I upped the idol a bit, just two hundred, other than that, I am just going to dyno it and that is it. Also, for the guy that thinks I should have more black, I have seen a couple with more black, it takes away from the kit itself. Also, my goal is to keep the car as stock looking as possible. NO stock car has a lot of black, hence why there is not much. Besides, I like it that way. Next, with the bar in the front. If a person actually thinks that an 3/4 of an inch, non metallic, bar is going to cause in drag in the air going to the intercooler, well. I will just leave it at that. Fellas I appreciate and respect your remarks and constructive criticism. With the Stillen Stage 2. Check up on the hp percentage increases, if I am not badly mistaken, the increases are not as much as one would hope. And for that kinda money, I think I would get as much hp for my buck. Just my opinion. However, that is a very good kit and I think that you will enjoy it greatly.

 

I do like the black, it is just not my style though man. Thank you for taking the time out to do that. I really appreciate it.

 

Very ****'N Nice...

 

sweet pics so far.... keep them coming...

 

Hey I did the install of this kit took me about 7 hours total to do it. I have done both vortech and the procharger kits on these cars and loved them both yet vortech has less issues with it than procharger. Procharger doesnt fit that well and needed some machine work on it. Hopefully in the future he will decide to build the motor and i will get the oppertunity to make close to 600whp with a g35 thats if i can talk him into it.

 

Now how would you make that much horse power and how much would it cost me?

 

danm!!! CAN YOU SAY hot

 

looks really nice, one of the more tastefully painted kenstyle kits out there. nice work.