Z tube with stock filter
If you're going to install the Z Tube or Popcharger, read this: (link). This thread discuses the problem in detail and could save you hundreds in repair.
Repaired the link, but it appears that the original post was damaged during the site conversion.
This solution has worked for me for over a year now...
Here is a photo to give you a clearer understanding of the problem:
Here's another post regarding the rubbing of the A/C line: (link)
Repaired the link, but it appears that the original post was damaged during the site conversion.
This solution has worked for me for over a year now...
Catatafish
Re: AFTERMARKET INTAKE OWNERS---READ ASAP
Ted,
Try using a zip tie to pull it further from the z tube. There's a bracket nearby perfect for this. Get a flashlight and examine it closely. Mine was barely touching plastic and the metal was scractched up pretty good.
Re: AFTERMARKET INTAKE OWNERS---READ ASAP
Ted,
Try using a zip tie to pull it further from the z tube. There's a bracket nearby perfect for this. Get a flashlight and examine it closely. Mine was barely touching plastic and the metal was scractched up pretty good.
Here's another post regarding the rubbing of the A/C line: (link)
Last edited by blksnake; Mar 5, 2005 at 09:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
350z, aftermarket, apach, filter, gain, horsepower, increase, kn, nissan, power, stock, tube, ztube, ztubebenefits
