for all the boneheads tring to run blow by tanks - G35Driver

Sep 8, 2008 | 09:45 AM

rpm06g35

Thread Starter

Registered User

iTrader: (20)

Joined: Jun 2006

Posts: 1,629

Likes: 3

for all the boneheads wanting to run blow by tanks

This is what you need something with baffles in it with ports large enough to flow volume http://www.cantonracingproducts.com/...&category=8040

if you plug off the rear port on the driver side valve cover. You could you this from the cross over tubes at the front of both valve covers. Let me know Mike

Last edited by rpm06g35; Sep 8, 2008 at 11:20 AM.

Sep 8, 2008 | 11:08 AM

express705

Registered User

iTrader: (25)

Joined: Apr 2007

Posts: 11,035

Likes: 10

From: Front Range

im not a bonehead...

Sep 8, 2008 | 11:21 AM

rpm06g35

Thread Starter

Registered User

iTrader: (20)

Joined: Jun 2006

Posts: 1,629

Likes: 3

baffled with separators is the way to go, 10an fittings= good volume

Sep 9, 2008 | 10:42 PM

APSMike

Registered User

iTrader: (1)

Joined: Oct 2005

Posts: 571

Likes: 1

From: South Florida

Definitely have to have the condensing media and some baffleing to trap the oil vapors. $120!!! No way.

Sep 10, 2008 | 12:00 AM

rpm06g35

Thread Starter

Registered User

iTrader: (20)

Joined: Jun 2006

Posts: 1,629

Likes: 3

I'm working on it leroooooooooooooooooooy. I'll let you know as soon as I get some stuff going. You can always find it cheaper as well http://cgi.ebay.com/Moroso-85471-Oil-Air-Separator-Tank-JEGS_W0QQitemZ180276394963QQihZ008QQcategoryZ46093QQrdZ1QQssPageNameZWD1VQQcmdZViewItem later mike

Last edited by rpm06g35; Sep 10, 2008 at 12:06 AM.