you guys think that i can roll with an oem 19 rear on the front for while until i can find an aftermarket set of wheels?
Registered User
Quote:
absolutely, but you will have to remove the stupid 10mm nut and spacer that sticks out from the disc first to mount itOriginally Posted by CLiX`G35
you guys think that i can roll with an oem 19 rear on the front for while until i can find an aftermarket set of wheels?
Registered User
Quote:
sorry for the double post lolOriginally Posted by CLiX`G35
The ones i was looking at are +23 8.5 front 9.5 rear I dont know too much about how this is going to fit on my g anyone out there wanna point me in the right direction...... i like when you have to roll the fender so the wheel is real flush .... i get the feeling these aren't gonna be as aggressive as i am hoping.
first off, the insurance paid for my works and my tires and rays lugs, so they will give you about 22-2500 for two wheels and tires, tpms and hardware. i got about 4500 for my 4.
offset of +17 all around is what i have. my rears don't rub AT ALL, EVER. the fenders are NOT rolled, but i am 1.8" drop in the rear so there is negative camber. Fronts only rub when i am bottoming out with the tire turned. If you plan on rolling your fenders get at least +12 or so
Registered User
Quote:
Originally Posted by CLiX`G35
The ones i was looking at are +23 8.5 front 9.5 rear I dont know too much about how this is going to fit on my g anyone out there wanna point me in the right direction...... i like when you have to roll the fender so the wheel is real flush .... i get the feeling these aren't gonna be as aggressive as i am hoping.
NOOO, dont do it
these will look stupid, specially GT-7s
you have to go 9.5 and 10.5
according to the spec sheet, if you want 20s +22 is you only real option but in 19s you can get +17
here's the spec sheet
http://www.mackinindustries.com/md/r..._spec.jpga.gif
Registered User
my integra got stolen that is why i bought this car so crap like this would not HAPPEN!!!!! screw these queers!!!
I think I am going with the volk GTS phantom finish.
anyone know if there is a dg coupe out there with these on?
anyone know if there is a dg coupe out there with these on?
Former G35driver Vendor
ShanesG
Former G35driver Vendor
close
Nov 24, 2020
- Join DateSep 2007
- LocationPasadena
- Posts:23,550
-
iTrader Positive Feedback100
-
iTrader Feedback Score(84)
-
Likes:106
-
Liked:335 Times in 187 Posts
^OMG that will looks so siiiick i had a photochop of my car done with them on my DG it looked tight! ill try and find the pic!
Registered User
Man that kinda b.s. really pisses me off! It's bad enough some of us choose to keep our cars oem so they don't attract unwanted attention. When i do decide get some aftermarket wheels, i'll really have to be on guard. Luckily there's a wheel security system made by autoloc.
im going by the old prison yard rules.... im going out to find the biggest baddest wheel theif and im going to shoot his *** for my stolen wheels as a messege to the community ..... my car will be safe with me in lock up .....
if not there is always the spine lugs and gorilla lock + alarm solution.
if not there is always the spine lugs and gorilla lock + alarm solution.
MY CAR ROLLS AGAIN!!!!!!!!!
I called Humberto over a JR Electronics on bird and two days later he called me back with a gu who had wheels.
a out 60% tread on original potenzas all 4 oem 19s $ 600 there dirty and have some curb but at least im driving again ill post pics in the morning.
I called Humberto over a JR Electronics on bird and two days later he called me back with a gu who had wheels.
a out 60% tread on original potenzas all 4 oem 19s $ 600 there dirty and have some curb but at least im driving again ill post pics in the morning.
Registered User
OEM !!
what happen with the insurance situation ( co cksucker)
what happen with the insurance situation ( co cksucker)
Florida G35 Club, General Member
Should have sold the other two and told insurance they stole all 4 lol....... Good luck!