When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Buddy of mine recommended I post here since the 350z forum is dying.
So 1st attempt at fitment was a fail. A brand new set of tires have been ordered to hopefully get the tires in with this crazy setup/dream my wife has for her Z. The car is in the air in both photos on even jack stands all round but the rear wheel only drooped .3 or .5 inches. The fronts drooped almost 1 inch. I would have taken a picture of the car on the ground but the front fenders were buckling from sitting on the tire with -4 degrees camber. Fenders have been pulled to the max and rolled. If anyone has some input, I would appreciate it. My own Z is currently setup for track/autox so I am a bit rusty from the days of when I used to do things like "stance".
Specs:
Weds Kranze LXZ
19x11 -32 Flat Face
19x13 -29 Concave Face
Custom made coilovers by Broadway Static
Safiro SF5000 tires
245/35/19
275/35/19
NEW TIRES ORDERED:
Nankang NS20 Nobles
255/30/19
285/30/19
^lmao holy fk i literally almost spit out my drink. wth is ur goal? buying wider tires is not gotta help its gonna make things worse. u need super neg camber to fit something that aggressive.
^lmao holy fk i literally almost spit out my drink. wth is ur goal? buying wider tires is not gotta help its gonna make things worse. u need super neg camber to fit something that aggressive.
Wife wants to have an aggressive stance. Was going to try 245/30 for the fronts but the price shipped to Hawaii was insane for a pair. I've modified the front kinetix arms for a bit more camber and we are running SPL rears. The super negative camber is the stance my wife is looking for, essentially similar to the die hard jdm vip cars.
