Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#1
Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
Ok so maybe to prevent all these threads that have been poping up lately asking the same questions about offsets, widths, tires, camber, etc. I figures we could try and clean it up by just throwing all the same general questions into 1 thread.
Mods/Staff, if you think this is a good idea, please Sticky this
Ask away...
Mods/Staff, if you think this is a good idea, please Sticky this
Ask away...
The following 5 users liked this post by ShanesG:
CYokG (12-15-2012),
Ferrara (03-05-2012),
GOR2G35 (05-06-2020),
Justin Lewis (05-17-2020),
nbarkins (10-22-2012)
#3
#4
The following users liked this post:
barberdave33 (10-01-2012)
#5
#6
#7
Trending Topics
#8
#13
#14
#15
maybe in addition to this a simple, "Official wheel/tire suspension specs thread" then you require people to post informative pictures (2-3) that show off wheel offset effectiveness and tire sidewall fitment etc and they give a simple list description of what wheel specs and suspension specs they have
example:
Front Wheel Size (include offset): 18x8+30
Rear Wheel Size (include offset): 18x8+30
Front Tire Size: 225/45/18
Rear Tire Size: 245/45/18
Front and rear spacer size (please include brand): 5mm front 15mm rear
Suspension type: G35 spec Tokico D-spec with 350Z Tein H-tech springs
Alignment info: -1.5deg front camber with -.05deg front toe, -1.8deg rear camber with 0 toe
Fender roll required: rear rolled and pulled slightly
***the following is just an example of an informative picture, not representative of the info above. note it clearly shows tire stretch, ride height and even offset effectiveness:
It would help as long as members contribute, also if you switch up wheels often, do not update your old post, add a new one just in case there was something unique in your old one.
example:
Front Wheel Size (include offset): 18x8+30
Rear Wheel Size (include offset): 18x8+30
Front Tire Size: 225/45/18
Rear Tire Size: 245/45/18
Front and rear spacer size (please include brand): 5mm front 15mm rear
Suspension type: G35 spec Tokico D-spec with 350Z Tein H-tech springs
Alignment info: -1.5deg front camber with -.05deg front toe, -1.8deg rear camber with 0 toe
Fender roll required: rear rolled and pulled slightly
***the following is just an example of an informative picture, not representative of the info above. note it clearly shows tire stretch, ride height and even offset effectiveness:
It would help as long as members contribute, also if you switch up wheels often, do not update your old post, add a new one just in case there was something unique in your old one.
Last edited by idrive_MD; 05-19-2009 at 03:20 PM.