When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
okay so i got a 05 g35x sedan and i want to lower it but still have camber in the front and back. people are telling me different things but i’m trying to figure out what else i need to buy except for the lowering springs. somone help me please!
okay so i got a 05 g35x sedan and i want to lower it but still have camber in the front and back. people are telling me different things but i’m trying to figure out what else i need to buy except for the lowering springs. somone help me please!
This is the whole kit for front and rear. Its what I have on my car. You can probably find it cheaper if you shop around. This will be all you need to bring your camber back into spec.
first time having camber but i drive a 05g35X sedan and i want to camber it after i lower it about an 1 1/2 an inch and i don’t wanna have hella camber. what’s a reasonable amount of camber?
I bought a pair of ssr Vienna sovereign. They didn’t come with tires but the previous owner said he was running 265/35/19 but he had an rc350. I don’t have much camber I just lowered my car so I might have to roll my fenders or get more camber so if anyone can help with specs that’d be appreciated! Fronts are 19x9 and Rears are 19x10 with 37 offset all around
Hey I’ve been looking for some new wheels. I’m into stance and have been looking at some Leon hardeitters ritters that have a 0 offset and are 18x11.5 just wanted to make sure these would fit before dropping the money on them
Hey I’ve been looking for some new wheels. I’m into stance and have been looking at some Leon hardeitters ritters that have a 0 offset and are 18x11.5 just wanted to make sure these would fit before dropping the money on them
11.5” wheels aren’t going to fit well on stock specs. You will need to make ride height adjustments, camber adjustments, roll and pull fenders, etc.
11.5” wheels aren’t going to fit well on stock specs. You will need to make ride height adjustments, camber adjustments, roll and pull fenders, etc.
Yeah that kinda of what I figured. I’m currently on BCs and looking for some new wheels. I would like to get a camber kit for my car. What wheel sizes would you recommend.
(Car is an 04 G35 coupe lowered on bc coils)
Hey I've been looking into some 57cr nismo wheels as well as some other notable ones like the normal gram lights 57cr as well as good ol rpf1's. I was recommended to buy 18x10.5+22 for the rear and 18x9.5+12 in the front. My question is whether or not i can run my stock tires safely until the end of their lifespan without excessive stretching as i just bought a pair of mich ps 4s all around and don't want to not use them as they have maybe a couple hundred miles of wear on em. My stock tire specs are 225/40/18 for the fronts and 245/45/18 for the rear. Thanks for yall's help!
G35. New suspension front and rear, ported plenum and manifold, coil overs, spec D ext
Originally Posted by myroncuz
what do you thinks the lowest offset i can go when i get my t1s? i have z stechs and will do 1/2" spring mount mod with 19x9.5 245/35 19x10.5 275/35. ill probably roll my rear fenders.. +17 front and rear? +15? thanks, help greatly appreciated
I just got the same set up on the rear 19-275-35 on a 11 rim. Can I go to a 295? I don’t like the rim sticking out further than the tire. Also is there an issue going with a different brand rear tire? The brand I got don’t make a 295
hey i was just wondering how wide would i be able to go on my 05 sedan looking for specs for big lip wheels looking to run 18x10.5 in front and 18x12 would i be able to? New at the car scene any help would be appreciated!
Currently running a 18x9.5 with 0.5 spacer (don’t know offset) 18x10.25 with 1 inch spacer (don’t know offset)
08-19-2022, 10:40 AM
