Due to hurricane flooding my driver seat wont move forward or backward
#16
So in this first picture, you can see the seat is situated all the way up, there is no way i can slide it back
The second photo shows the plastic trimming in on the driver seat
as you can see here, the bolt to the front is completely encased by the seat, since i cannot move the seat back this puts me in a jam
just showing the front bolts and how its slid all the way forward
back of the driver side seat
Last edited by Sonford; 09-05-2017 at 02:14 PM.
#17
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS
#18
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS
I'm pretty sure the drive motor you're looking for is the one mounted under the front right side of the seat. I can see mine when looking from the front, connector is accessible (motor too) by removing the plastic trim.
Also, here are a couple other views so you can see where the bolts are is you want to continue down that path.
Here is a shot of the backside of that plastic trim on the side.
Hope this helps.
Also, here are a couple other views so you can see where the bolts are is you want to continue down that path.
Here is a shot of the backside of that plastic trim on the side.
Hope this helps.
#20
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS
#22
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS
#23
#24
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS