New SLR and pics of my baby
sucks.. so u decided to go with the gold ones aye? 
Joined: Nov 2009
Posts: 733
Likes: 0
From: So cal and Nor cal
she's ok....need to put a hold on some mods..but i think ill stop after i give her a drop..then pay off my bills..so no rims until next summer *tear* plus there are a TON of makeup stuff that ive been eyeing....LOLOLOL
Thanks 
Luckily, you have the 19s, all you really need is a drop, spacers, and you're set. I was dropped on my 19s for a year before I bought my wheels lol.
Time to look up how to hook up my trunk button!
Luckily, you have the 19s, all you really need is a drop, spacers, and you're set. I was dropped on my 19s for a year before I bought my wheels lol.
Time to look up how to hook up my trunk button!
Ok, so this is what I found....
I did this a long time ago, so going my memory.
JDM tails have two connectors. One large (main), one small (two wire connector). Small two wire connector is the trunk release button.
The USDM tails only have one main connector. Notice that ALL connector pins are used on 06 USDM tails. JDM connector uses all but one pin connector.
Reference the JDM tail main connector with pin NOT used to your G35's main connect that has wire to that unused JDM pin. Remember that wire or mark in wiring loom.
Go back to JDM tail small two wire connector. Choose any two wires (doesn't matter which one, as mine were both 'solid black'). Splice one wire to the wire you found/remembered/marked in G35's main wire connector earlier. Take other wire and connect to ground (I found a cluster of ground wires on a small grounding post with nut and used that)
That's it and your done.
Hope that all made sense.
G/L
Doesn't seem very difficult, I'll give it a try when I got some free time.
I did this a long time ago, so going my memory.
JDM tails have two connectors. One large (main), one small (two wire connector). Small two wire connector is the trunk release button.
The USDM tails only have one main connector. Notice that ALL connector pins are used on 06 USDM tails. JDM connector uses all but one pin connector.
Reference the JDM tail main connector with pin NOT used to your G35's main connect that has wire to that unused JDM pin. Remember that wire or mark in wiring loom.
Go back to JDM tail small two wire connector. Choose any two wires (doesn't matter which one, as mine were both 'solid black'). Splice one wire to the wire you found/remembered/marked in G35's main wire connector earlier. Take other wire and connect to ground (I found a cluster of ground wires on a small grounding post with nut and used that)
That's it and your done.
Hope that all made sense.
G/L
Doesn't seem very difficult, I'll give it a try when I got some free time.