FS: Kinetix Racing Rear Traction Arms - G35Driver - Infiniti G35 & G37 Forum Discussion

Jan 8, 2012 | 12:36 AM

bokchilo

Thread Starter

Registered User

iTrader: (26)

Joined: Jun 2007

Posts: 571

Likes: 13

Kinetix Racing Rear Traction Arms

Selling a set of slightly used kinetix racing traction arms. I purchased this set brand new and was only used on my G for about 200 miles. I took it off because I had a shop fabricate some other custom suspension stuff so I dont need these anymore.

Here's the description pulled off of kinetix's website:

Quote:

These adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5"-2" and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate "wheel hop".

Fabricated out of stainless steel, with a stainless center turnbuckle for increased stiffness and strength. Center turnbuckle has fine threads for precise adjust-ability. Arms are produced in house and are precision TIG welded.

** For cars lowered more than 2", you may not be able to pull your toe back into spec as well as your camber. Please email us for a suggested fix that will allow camber/toe to be pulled back into spec with minor modification to the vehicle **

** we STRONGLY suggest getting your alignment done by a professional with a computer**