FS: F/R Nismo Adjustable Endlinks (Project)

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 03-10-2012, 06:54 PM
JaE35's Avatar
Moderator

Thread Starter
iTrader: (37)
Join Date: Jul 2010
Location: DFW, TX
Posts: 8,318
Received 802 Likes on 678 Posts
G35 Sedan
F/R Nismo Adjustable Endlinks (Project)

SOLD

Selling these front and rear nismo end links as I was unable to get them to fit with my aftermarket sways properly. What you see in the picture is what you'll get. Fronts on top and rears on bottom in image, washers included work as spacers. In the image the piece that isn't connected has a washer that's seized and will take a little work (plyers) to get loose. These are listed as a project as they might take a little work to fit properly but all of the flex joints are in tact and working. Don't want a lot for these i'll do 80 shipped just about anywhere
 
Attached Thumbnails F/R Nismo Adjustable Endlinks (Project)-imag0012.jpg   F/R Nismo Adjustable Endlinks (Project)-imag0013.jpg  

Last edited by JaE35; 03-10-2012 at 11:39 PM.
  #2  
Old 03-10-2012, 09:53 PM
jbwrecked's Avatar
Registered User
iTrader: (17)
Join Date: Sep 2011
Location: SA
Posts: 926
Received 30 Likes on 30 Posts
Are these supposed to be better than oem's? My fronts on my 03 coupe (stock sways/endlinks) come off on occasion.
 
  #3  
Old 03-10-2012, 10:00 PM
JaE35's Avatar
Moderator

Thread Starter
iTrader: (37)
Join Date: Jul 2010
Location: DFW, TX
Posts: 8,318
Received 802 Likes on 678 Posts
G35 Sedan
Well factory end links offer no adjustment when you put on aftermarket sways so they could potentially crack or wear out causing a clunk or etc....these would be better than oem and sufficient for aftermarket applications if you can get them to work right...

I've priced them i think fairly cheap for the situation i know these typically run 120-150 in the front and another 120 for adjustable rears

I figure about 30 bucks a piece for front and rear equaling 60..5 dollar box and 15 dollar shipping equaling 80 total is fair
 
  #4  
Old 03-10-2012, 10:43 PM
Invalid_User's Avatar
Registered User
iTrader: (23)
Join Date: Sep 2007
Location: Tampa,Florida
Posts: 9,738
Received 217 Likes on 146 Posts
what sway bars do you have? wonder why they didnt fit
 
  #5  
Old 03-10-2012, 11:05 PM
JaE35's Avatar
Moderator

Thread Starter
iTrader: (37)
Join Date: Jul 2010
Location: DFW, TX
Posts: 8,318
Received 802 Likes on 678 Posts
G35 Sedan
Cusco, they were just a little long
 
  #6  
Old 03-10-2012, 11:23 PM
jbwrecked's Avatar
Registered User
iTrader: (17)
Join Date: Sep 2011
Location: SA
Posts: 926
Received 30 Likes on 30 Posts
I think ill go ahead and take em. What problems were you running into with em? Feel free to pm me!
 
  #7  
Old 03-10-2012, 11:31 PM
JaE35's Avatar
Moderator

Thread Starter
iTrader: (37)
Join Date: Jul 2010
Location: DFW, TX
Posts: 8,318
Received 802 Likes on 678 Posts
G35 Sedan
jbwrecked you were just a few mins behind another member..if it falls through i'll pm you
 
  #8  
Old 03-10-2012, 11:37 PM
jbwrecked's Avatar
Registered User
iTrader: (17)
Join Date: Sep 2011
Location: SA
Posts: 926
Received 30 Likes on 30 Posts
please fall through lol thanks
 
  #9  
Old 03-10-2012, 11:37 PM
JaE35's Avatar
Moderator

Thread Starter
iTrader: (37)
Join Date: Jul 2010
Location: DFW, TX
Posts: 8,318
Received 802 Likes on 678 Posts
G35 Sedan
These are sold
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marlin84
Wheels & Tires
38
04-01-2020 12:52 PM
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM
g.spot
G35 Cars
12
05-09-2016 10:54 PM
dseet
G35 Sedan V36 2007- 08
2
10-11-2015 12:40 AM
AL8782
G35 Coupe V35 2003 - 07
4
10-03-2015 10:26 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: FS: F/R Nismo Adjustable Endlinks (Project)



All times are GMT -4. The time now is 01:23 PM.