I currently have Eibach pro-kit lowering springs. I want to drop my rear another .1 inch or .2 (prefer .2in more).It could be a bit more. I'm willing to buy Eibach Sportline Rear or Full kit depending on price. I'm open to any rear springs that have a lower drop than the Eibach pro-kit (I believe it is a 1.0in drop). So pretty much I am looking for the eibach sportline rear drop which is around 1.4in.


I want to cover this gap.

i have rear tokico 350z springs. 2" drop on the sedan. let me know if you want them. $50 plus shipping.

i see you have the coupe. you would have to cut the spring mounts to get 2".

i have revised rear 350z springs if you are interested

Wow, my fault. I made a mistake in my post, I meant .1 - .2 in drop. So Instead of the pro kit drop I have, I want a Sportline drop. Or anything close.
Sorry Santod, I sent you a pm saying 2in is too much drop, then I realize I actually said I wanted that. I revides it, so sorry again.

bump

Why don't you just do the spring mount mod?

Is it a hard job? Does it affect ride quality?
Also, will I be able to get the drop I want?
lol, A lot of questions, I know. I just want to be on the safe side

From what I've seen, it looks pretty easy. Looks like you just remove the rear spring, take out the mount, saw off the amount you want to drop (ex. .5 inch) then put it back together. I plan on doing it so I can drop the back a bit more. Shouldn't affect ride quality. It'd be WAY cheaper than buying other springs. There's a nice DIY on here that shows the whole process. Check it out

stop fvcking posting up your ad in peoples threads!!!

I think im going to do the spring mount mod. I need some help on this one issue though, I'm not sure if my tires will tuck in easily the way they are now. The size is 19x9.5 +33 with 25mm adapters w/275/35tires. My fender in the rear is cut almost all the way. How will I know or how can I test to see if it will tuck or rub??