FS: Air Cup Kit
Air Cup Kit
What I have here for sale is a brand new cup kit from Stance Solutions(UK) setup is for front of car; all components are brand new and the price is firm at $975 shipped plus paypal fees.Pretty much everything you need...just need some wire to make everything work. The cup needs to slip over a 20mm shaft so make sure your coilover is setup for this. If you have a smaller shaft 
then you need a reducing sleeve. Static now has reducing sleeves to fit your application.As for rears the same company now can do rear setup for a true coilover system, unlike before. Adam can also make custom sized cups for your rear setup if you need it as well. Turnaround time before was 1 week, I am not sure as of now. http://www.stance-solutions.co.uk/1
To complete this setup( if you want rears) it would cost you another $755- $815.So roughly 2 grand to run a simple front and rear cup setup.
If you just need reducing sleeves and o-rings for a 12//12.5/14/15/16mm shaft the cost is $60. So if you purchase what I have and your shaft isn't 20mm you'll need 60 more bucks to make it work on your app.
$975 shipped plus paypal fees
2 x Static+ modules
5m of 6mm airline
all 6mm metal push connects needed
1 x schrader (car) valve to pressurise
1 x pressure release valve
1 x gauge to monitor system pressureViair 380c pump with relay
2 gallon tank
paddle
pressure switch
fuse holder
3/8"nptx1/4"npt bushing
then you need a reducing sleeve. Static now has reducing sleeves to fit your application.As for rears the same company now can do rear setup for a true coilover system, unlike before. Adam can also make custom sized cups for your rear setup if you need it as well. Turnaround time before was 1 week, I am not sure as of now. http://www.stance-solutions.co.uk/1To complete this setup( if you want rears) it would cost you another $755- $815.So roughly 2 grand to run a simple front and rear cup setup.
If you just need reducing sleeves and o-rings for a 12//12.5/14/15/16mm shaft the cost is $60. So if you purchase what I have and your shaft isn't 20mm you'll need 60 more bucks to make it work on your app.
$975 shipped plus paypal fees
2 x Static+ modules
5m of 6mm airline
all 6mm metal push connects needed
1 x schrader (car) valve to pressurise
1 x pressure release valve
1 x gauge to monitor system pressureViair 380c pump with relay
2 gallon tank
paddle
pressure switch
fuse holder
3/8"nptx1/4"npt bushing
Guest
Posts: n/a
Only coils these fit are Function Form in 20mm
Its the same set I've run on and off for 2 years.
Its the same set I've run on and off for 2 years.
Trending Topics
Guest
Posts: n/a
You can get reducers. I just stated in current form of 20mm that FF coils are the only ones that work.
Make sure also that the spring is less than 90mm in diameter. Not usually an issue, but will need to do sole grinding to make my Swift springs fit.
Trust me. I helped Adam fine tune several aspects of these kits. I was one of the first in the US to order this kit and the first to install on a VQ. I know all about what is available
I sold my set here for $600 a few months back. Just got my second kit and will be testing new things now.
Make sure also that the spring is less than 90mm in diameter. Not usually an issue, but will need to do sole grinding to make my Swift springs fit.
Trust me. I helped Adam fine tune several aspects of these kits. I was one of the first in the US to order this kit and the first to install on a VQ. I know all about what is available
I sold my set here for $600 a few months back. Just got my second kit and will be testing new things now.
Last edited by AmateuRN; Mar 18, 2013 at 09:22 AM.
lol!!! shaft siiiiiize!!!!
btw I bought the setup because I saw yours. I am glad you coordinated with Adam...In waited awhile to reducers and rear setup. Now that he's able to do it, I ended up changing my mind.
btw I bought the setup because I saw yours. I am glad you coordinated with Adam...In waited awhile to reducers and rear setup. Now that he's able to do it, I ended up changing my mind.