___ SPC Camber Kit Front and Rear HOLIDAY BLOWOUT | Save your tires and $$$ ___
#48
Just spoke with Eddie from THM and I took advantage of the SPC offer. I'm going install the camber arms while I'm swapping out my D-Specs for Tein Basics. I also ordered OEM revised end links and compression rods to get it all done while I'm in there. I'll let everyone know how the install goes after I get the car off the alignment rack.
Eddie, thanks for your help today and I'll post again after the alignment.
Eddie, thanks for your help today and I'll post again after the alignment.
#49
Originally Posted by Easein2itG
Just spoke with Eddie from THM and I took advantage of the SPC offer. I'm going install the camber arms while I'm swapping out my D-Specs for Tein Basics. I also ordered OEM revised end links and compression rods to get it all done while I'm in there. I'll let everyone know how the install goes after I get the car off the alignment rack.
Eddie, thanks for your help today and I'll post again after the alignment.
Eddie, thanks for your help today and I'll post again after the alignment.
#53
#55
Replied to all PM's. I sent links to everyone who needs to order via online:
Rears: http://thmotorsports.com/spc-perform...0/i-68855.aspx
For those doing the F+R Kit, call us at 1-800-959-0145 ext 2 ASAP. Eddie
Rears: http://thmotorsports.com/spc-perform...0/i-68855.aspx
For those doing the F+R Kit, call us at 1-800-959-0145 ext 2 ASAP. Eddie
#59
Originally Posted by tragedycat
Quick question, if I'm running 350z S-Tech's on 19" I should only need the rear set right?
http://thmotorsports.com/spc-perform...0/i-68855.aspx