Tuner Directory
#16
11-07-2008, 01:21 PM
DSG tuned my car this morning...
Kinetix SSV
Invidia test pipes (non resonated)
Designed Chaos throttle body spacer
Injen CAI (full length into the bumper)
car dyno'd at 210WHP and then they began the tune on a emanage ultimate.
hour later they handed me the dyno plot...
251.7WHP
could definitely feel the difference in the way the car drove as I left the shop
they use a dyno dynamics for their dyno there and its setup for tuning under load compared to a dynojet that give power numbers based on calculations but not under load. By adding 15% to the WHP numbers on the dyno dynnamics to match a dynojet's numbers I'd be at 289.4WHP instead of the 251.7 I made on the dyno dynamics. (Just to put things in perspective...)
they charged me $535 and that was the cost of the tune ($500 flat rate) and the install of the emanage ($35 cuz I had the PnP harness so they didn't have to splice anything)
the guys there are real friendly and seem to know their way around the VQ motor. I'd reccommend them to anyone looking to have turbos put in or upgraded and tunes performed. They don't do motor builds... they just suggest Cosworth built short blocks or tell you to go somewhere else for a motor build
in my book.
Can post dyno plot when I give it to Erik to scan
Kinetix SSV
Invidia test pipes (non resonated)
Designed Chaos throttle body spacer
Injen CAI (full length into the bumper)
car dyno'd at 210WHP and then they began the tune on a emanage ultimate.
hour later they handed me the dyno plot...
251.7WHP
could definitely feel the difference in the way the car drove as I left the shop
they use a dyno dynamics for their dyno there and its setup for tuning under load compared to a dynojet that give power numbers based on calculations but not under load. By adding 15% to the WHP numbers on the dyno dynnamics to match a dynojet's numbers I'd be at 289.4WHP instead of the 251.7 I made on the dyno dynamics. (Just to put things in perspective...)
they charged me $535 and that was the cost of the tune ($500 flat rate) and the install of the emanage ($35 cuz I had the PnP harness so they didn't have to splice anything)
the guys there are real friendly and seem to know their way around the VQ motor. I'd reccommend them to anyone looking to have turbos put in or upgraded and tunes performed. They don't do motor builds... they just suggest Cosworth built short blocks or tell you to go somewhere else for a motor build
in my book.Can post dyno plot when I give it to Erik to scan
Last edited by Iron-Mike; 11-10-2008 at 03:34 PM.
#17
11-22-2008, 04:29 PM
Xact Dyno
Tempe, AZ
www.xactdyno.com
Dynapack 4000+2000 AWD dyno
Making power since 2003
UpRev Osiris Pro Tuner
UTEC too (if you can't sell it to get Osiris :-)
Tempe, AZ
www.xactdyno.com
Dynapack 4000+2000 AWD dyno
Making power since 2003
UpRev Osiris Pro Tuner
UTEC too (if you can't sell it to get Osiris :-)
#18
12-15-2008, 02:30 PM
Registered User
Join Date: Sep 2007
Location: Torrance, Ca
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
G-dimension
City of Industry, CA (near Rowland Heights)
626-839-3777
www.g-dimension.com
Dynojet 2wd above ground
Tunes:
EMS: Power FC, Fcon V-pro, AEM EMS, Motec, Haltech
Piggyback: AFC, E-manage
This is a primarily a nissan specialist, they have 2 tuner on board leon chang for AEM/PFC/AFC/FCON/ E-manage and another for Motech/ Haltech
- speak to owner James Chang, he's always available to give advice via email and phone
City of Industry, CA (near Rowland Heights)
626-839-3777
www.g-dimension.com
Dynojet 2wd above ground
Tunes:
EMS: Power FC, Fcon V-pro, AEM EMS, Motec, Haltech
Piggyback: AFC, E-manage
This is a primarily a nissan specialist, they have 2 tuner on board leon chang for AEM/PFC/AFC/FCON/ E-manage and another for Motech/ Haltech
- speak to owner James Chang, he's always available to give advice via email and phone
#20
01-27-2009, 12:32 PM
#22
03-12-2009, 07:36 PM
Join Date: Aug 2008
Location: Boston
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
Not cool.
#25
03-27-2009, 10:39 AM
Join Date: Aug 2008
Location: Boston
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
#26
04-24-2009, 04:05 PM
Registered User
Join Date: Apr 2005
Location: Edmonton AB Canada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
#28
09-07-2009, 03:23 PM
Speed Force Racing
7945 ission Gorge Rd. #105
Santee,Ca 92071
619-328-4012
http://www.speedforceracing.com
Dyno Dynamics
We tune these systems among others: AEM,Autronic,FAST,Electromotive,Haltech,HKS Vpro,Osirus,Megasquirt,Motec,Mircotech,Utec and Split Second
7945 ission Gorge Rd. #105
Santee,Ca 92071
619-328-4012
http://www.speedforceracing.com
Dyno Dynamics
We tune these systems among others: AEM,Autronic,FAST,Electromotive,Haltech,HKS Vpro,Osirus,Megasquirt,Motec,Mircotech,Utec and Split Second
