Custom 10' sub box for 2007 G35 sedan
Joined: Jun 2010
Posts: 312
Likes: 18
From: Atlanta, Ga
Custom 10' sub box for 2007 G35 sedan
Hey, so i've got a quick question. Does anyone know where I can find a custom sub box for a 2007 G35 sedan? i've seen the sonixelectronix one and it's got 2 12' holes, but i'm getting 2 JL audio 10' subs and I can not find any custom sub boxes that will work. If someone can help me out cause i've spent about the good part of the day searching for some. Thanks
http://cgi.ebay.com/Custom-Infiniti-G35-Sedan-Sub-Box-Speaker-Enclosure-07-/230527620866?pt=LH_DefaultDomain_0&hash=item35ac845702
These come standard built for 12" subs but you can request that they make you one for 2 10s.
These come standard built for 12" subs but you can request that they make you one for 2 10s.
It's possible. I remember reading a thread somewhere in here of someone doing the same.
Trending Topics
you will need a external amp and a line out converter. i have a 10" infinity 1000w DVC sub with a kenwood 1000W class D mono Amp (wired at 4ohms) and it sounds great. no trunk or rear decklid vibration at all. total amp sub and box only set me back about 200 bucks. gotta love EBAY!!!
you will need a external amp and a line out converter. i have a 10" infinity 1000w DVC sub with a kenwood 1000W class D mono Amp (wired at 4ohms) and it sounds great. no trunk or rear decklid vibration at all. total amp sub and box only set me back about 200 bucks. gotta love EBAY!!!
I hooked my sub and amp without a LOC. Just make sure your amp has Speaker level inputs or you can use a LOC which will give you the RCA input. I do have a digram for the bose wiring somewhere i found on the internet for the 07 G35x
I had a single 10" and box I wanted to add to my G sedan. I have NAV and tech packages(ie. XM sat radio) which means there are no available preouts from the stock head unit. Got an LOC, and connected into bose wiring, which goes through the stock bose amp in rear deck. Ended up, upgrading with a 2nd sub and CAP. The dual sub box was slightly too big, so I got audio shop to shave off the bottom corners. Now, sub box fits like a glove with AMP, LOC, and CAP mounted on top of box.





