Hello Winters here and im done with my finals, so i decided to work on my sound system. Note i have navi with studio on wheels.

Heres the car undressing herself


Got done running my blue four gauge power wire!



I decided to make a bracket and screw on a distributer block (4 gauge to 8 gauge) just in case i add a amp for my speakers later on.


Heres my amp (alpine m-600)


This is the location i decided on, since the m-600 is small and petite


Heres the amp mounted and you can see the line out converter up top in the black( I didn't want to deal with the headache of installing the loc and Fuq-ing stuff up so i had JML Audio install it for around 150 including the loc itself)




Yup thats all i have right now. I'll keep you guys posted. The sub thats going in is my type-R 12"
pictured in my old setup

 

the LOC was the hard part LOL this didnt help me one bit

 

^ its not that hard, ill try to dig up and post the diagram for the Bose system and you can tap into the wires right from the bose amp in the trunk for the loc

 

nvm, i just searched and your thread was the 1st one to pop up, looks like you found the diagram.

 

yeah so that is the right way to do it? just wanted to make sure cause its a 2009 g and im not sure if the wiring scheme changed. thanks bhai

 

Nice bro looks clean !

 

@samsizzle: lol, np bro, ya i believe i found the proper one for the 07 G with bose but someone make sure.

 

When i went to go get my quote. they tode me that the car didn't need a line out converter, but to be on the safe side(regulating the flow of something ?signal? )

 

i have an 08 but im assuming its the same as a 07?

 

yes your correct 07 and 08 are the same

 

^whs, just buy a LOC and it will tell you which wire need to connect where, and then match up the wires with just this harness with a wire/line tap and you should be good to go within a few minutes to install you system.