I'm about to install BERK HFC's to my 08 G35X anyone recommend?
BTW i live in NY.It should be no ploblem...I guess! as stated on BERK Website

OBDII & 49 state compliant

If there any fella with 07-08 G35 sedan has done this pls!!!! advice and comment about good and bad of HFC.Thx!!

 

im getting my stillen in on weds and probly going to attempt to put it in on thurs if you do it by then let me know how it went.

 

Mine is on schedule UPS delivery tomorrow.Will have it install rightaway.
I'm leaving for camping on THURSDAY!!! Can't wait!!! to try...

 

um......

https://g35driver.com/forums/media-share-v36-sedan/230220-berk-hfc-installed-video.html

 

are you doing it yourself?? so your gonna have it before me. let me know how it goes. thanks!!!

 

Finally received HFC. Holy Moly!! It's look nice. It was very hard to install
I try many time to loose the bolt but Da*m it was hard.Not sure if they will need special tools.I can loose only 2 nut (1 from each size)
My concern was NO ROOM!!! Specially the passenger size. I decided to bringing it to the shop.Hopesully i can get it done today.

 

ooh man! what shop did you bring it too i called like midas all around they said that they wouldnt do it.

 

Just call Strauss Auto to have it replace but they ignore and unable to do it since they said it could void our waranteed and they ask me to go to the stealership.No way, I know a local shop that own by my friend. will bring it there.
I really wanna DIY so i can get more knowledge of doing it.Most of my mods i've done myself.So dissappoint that i could not loosing those 3 bolt on the Cat...Da*m no room.
Anyone DIY this before pls.help.Thx!

 

If it's anything like the G coupe and 350Z, which i've done several times on my own, you can get the bottom 2 bolts from underneath the car and for the last one you have to come from the top with extensions and a socket wrench, that's the only way you can get that top bolt off. However this does apply to the G coupe and 350Z, i'm not sure on the sedan, but I assume they should be the same?

 

Thanks! Rick,
I've try to get the 2 bottoms bolts and one of them was completely ok but the second one was only the female that loosing not the male (center bolts)
They are suppose to come out together but they are disapart and spercially
No Room as i said.I think it's different between G35 Sedan and G35 Cpe and 350zx.I even try to do it from the top but even harder.I don't wanna give up.
I don know if any special tool is needed?

 

finally found a local muffler shop that will do it for me for 140$ they said about1.35 hrs for labor. vids+pics up as soon as i gitrdone.

 

Don't let them cut the bolts.In case you wanna change it back.I will get it done tomorrow moring.GL

 

Finally,I'm done>>> YEH~~~~~
Holy..molY! I love it..Alot! Just wat i want.
- Alittle more sound..from Stock nice Tone when Step on Gas
- Deep!!!!
-Nice Peice of BERK TECH. Thumbs UP!!
- Still Keep my Luxury but faster and super Deeper
Paid $90 for installed. what a friend for? HA....
I help them too.just Holding the light and give some idea.ei ei.
Specially thx to my friends so i have him $60 from My appreciation.

Now i 'm ready!!!! CAMPING!!!!!

I will post mo picture at camping. VDO and mo result when i come back.

GL to you suby01 Tell the auto shop to Torch the 2 top bolts.They are the hardest one and need to loose from the top( take off the intake tube)

*** B*careful when take off the O2 sensor.It's super hard.you need to torch it too but not too hot otherwise you will damage the screw.
BECAREFUL!! you don't wanna pay extra.

GL everyone. Hee Haaa....