Inside our throttle bodies
#1
#2
#4
Registered User
iTrader: (11)
Why in the hell would you drill open the TB?
If you had done a little research here, you would find out that the ECM must "re-learn" the TB control after you have unplugged the TB and then TURNED ON THE KEY. If you do not turn the key on, there is no problem.
So look around and find the re-learn procedure.
If you had done a little research here, you would find out that the ECM must "re-learn" the TB control after you have unplugged the TB and then TURNED ON THE KEY. If you do not turn the key on, there is no problem.
So look around and find the re-learn procedure.
#5
Why in the hell would you drill open the TB?
If you had done a little research here, you would find out that the ECM must "re-learn" the TB control after you have unplugged the TB and then TURNED ON THE KEY. If you do not turn the key on, there is no problem.
So look around and find the re-learn procedure.
If you had done a little research here, you would find out that the ECM must "re-learn" the TB control after you have unplugged the TB and then TURNED ON THE KEY. If you do not turn the key on, there is no problem.
So look around and find the re-learn procedure.
#7
Trending Topics
#8
Registered User
iTrader: (11)
Before you jump up someones *** and call them dumb, make it clear what you are doing.
dumbass
Last edited by Texasscout; 11-28-2011 at 05:25 PM.
#9
This does not make it very clear, you had done anything other than drill it out to look at it. You don't post a link to your other thread, you just say "posted elsewhere". You don't state that you tried the re-learn or not. How were we to know that this was just a progression of your repair? There are a lot of newbs out there that would jump into something like this without getting some info.
Before you jump up someones *** and call them dumb, make it clear what you are doing.
dumbass
Before you jump up someones *** and call them dumb, make it clear what you are doing.
dumbass
"here's some quick pics of inside our throttle bodies held together by 4 rivets easily drilled out. Pretty cool stuff."
How can I be clearer for you then saying here's some quick pics. I was just providing pics if anyone was curious. I didn't even ask for help or talk about the re-learn and you come saying why the hell did you do this, do some research before you do that etc.
#10
Registered User
iTrader: (11)
Thread
Thread Starter
Forum
Replies
Last Post