Hey i order a m20 off overstock a couple days ago and wanted to know what yall's recomendations for mounting the heads were. It has the 2 sensors so where would you place them? I got a sport so the bottom or the grill i guess. Any tips?

 

there was a thread on this a while back guy modded his grill a tiny bit to have them level with the headlights

 

I have no idea but that's on my wish list so please keep us posted on the results. Good luck mounting it.

 

I was thinking about picking up the blinder M45, so please take pics of the install, so maybe i'll attempt to DIY

 

I did a search and couldn't find anything UPS is predicting the 1st for delivery so Ill post up some pics and problems I encounter. I think im going to go with the grill and purchase another one and put an additional sensor on the bottom and then one on my back plate. Is it common to get gunned from behind? Also im going to be doing a hardwire for my rx65 tuesday so i may post that in another thread once it gets here. Also I reccomend overstock for both the blinder and rx65. 30% off and 1 dollar shipping

 

Hey does anyone have any experience on where to mount them? Im thinking the marks in red but im concerned about the overhang from above the mid fender area. Anyone have experience with any of these locations?

 

I was took that te lower grill was to low to work properly

 

i think the upper or lower grill is a better bet, than the small holes on the outside of the bumper... B/c most likely i think if they are going to scan you, they'll try to shoot somewhere in the middle of the car, so they'll be less likely to miss...