V36 General Tech Questions Questions and Posts that Do Not fit under the other Tech catagories

help with offsets..

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 10, 2008 | 04:46 PM
  #1  
MANSU_V36's Avatar
Thread Starter
|
Registered User
Joined: Apr 2008
Posts: 129
Likes: 7
help with offsets..

does anyone kno if 20x9.5 +17 fronts 20x10.5 +13 rears would fit...on the 07+ sedans...
 
Reply
Old Jul 10, 2008 | 04:55 PM
  #2  
g35_6gear's Avatar
Registered User
Joined: Jul 2003
Posts: 743
Likes: 0
Originally Posted by MANSU_V36
does anyone kno if 20x9.5 +17 fronts 20x10.5 +13 rears would fit...on the 07+ sedans...
Not even close.

Fronts in a 9.5" would be tight...maybe around a +40-45 offset required.
Rears in a 10.5" have been done but only in a higher offset....around +48


https://g35driver.com/forums/media-share-v36-sedan/231168-20x10-5-no-rubbing-4-inch-lip.html
 
Reply
Old Jul 10, 2008 | 05:19 PM
  #3  
Wei's Avatar
Wei
Registered User
Joined: Aug 2007
Posts: 421
Likes: 0
only way i see it fitting is slamming the right, camber it out and some major fender pulling type of work
 
Reply
Old Jul 10, 2008 | 05:41 PM
  #4  
terrycs's Avatar
Registered User
iTrader: (54)
Joined: Dec 2006
Posts: 3,519
Likes: 32
From: Southern California
Premier Member

Not unless you are going to be the first wide body sedan!
 
Reply
Old Jul 10, 2008 | 09:26 PM
  #5  
MANSU_V36's Avatar
Thread Starter
|
Registered User
Joined: Apr 2008
Posts: 129
Likes: 7
thanks for all your replys

what if i go 10.5 +40 with strecth tires
 
Reply
Old Jul 11, 2008 | 01:44 AM
  #6  
Wei's Avatar
Wei
Registered User
Joined: Aug 2007
Posts: 421
Likes: 0
that i'd say would work (lowered and camber)
 
Reply
Old Jul 11, 2008 | 01:47 AM
  #7  
Gdup35sedan's Avatar
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach
Premier Member

you can do a 10.5+40 without stretching the tires if you drop the car (over and inch) and run around -1.8 rear camber. You can still run a 275/30 tire with those specs.

If you dont want to run that much negative camber then you can get a 255/35 tire and run -1.4 or so camber as long as you're dropped (over an inch)
-GP-
 
Reply

Trending Topics

Old Jul 20, 2008 | 06:24 AM
  #8  
n15m0's Avatar
Registered User
Joined: Feb 2008
Posts: 168
Likes: 3
Do the 04 and 07 sedans take similar offset and widths? ie do the both have similar guards and take the same maximum offsets?

Thks
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toymachine2009
G35 Sedan V35 2003-06
17
Jul 16, 2010 02:49 AM
cchaorule
Wheels & Tires
8
Dec 2, 2008 03:41 PM
WinglessG
Wheels & Tires
4
Dec 20, 2006 10:05 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:23 PM.