Hey guys I just bought some axis seven mods 3 piece in 20 x 9 and 20 x 10 . I wanted to know if i needed to get spacers for the car? Im thinking about getting 245/35zr20 in the front and 275/30zr20 in the rear. Thanks again guys

 

Aren't the 3pc wheels custom made to fit your car? I thought that was why they were so much more money.


Silverstone 6MT Maya DTM 20's

 

Well when i bought the rims, the shop told me i needed to buy some spacers for the car, I wasn't sure if he was telling me the truth or trying to make some extra cash, I dont know who to ask if I need spacers or not, spacers cost around $100 and i'm not really down to spend any more money

 

Are you sure that they are 3pc rims? The 3pc only come in 19" according to their site and can range from $1550 - $1925 a wheel.


Silverstone 6MT Maya DTM 20's

 

I seen a couple people on this site and My350Z.com that have 20x10 and did not need spacers. Do a search and send them a PM to get confirmation. Also try to PM guys on My350Z.

- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-

 

yeah...the se7en mods are 1pc wheels that have a 3pc look...i likem a lot...but anyways, if you got the +35mm offset for both the front and rears then you wont need spacers as long as you don't have the brembo's

John H.
2003 Infiniti G35 Coupe 5AT-Ivory Pearl-Premium Pkg-Performance Pkg.

 

Yea the cataloges only have them in 19's but you can order them in 20s if you get them directly from axis. If i told need a spacer i'll post up a pic of the car with them on friday.

 

You will need spacers for the front...20mm to be exact. The rears will be fine. There is a guy here raj007 PM him if you have any questions.


http://www.bigwheelz.com/