Wheels & Tires Grabbing the road and stopping.

will these wheels fit??????

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 8, 2006 | 12:07 AM
  #1  
FriscoD415's Avatar
Thread Starter
|
Registered User
Joined: May 2005
Posts: 19
Likes: 0
From: San Carlos
will these wheels fit??????

Bolt Pattern: 5x114.3

Size: STAGGERED- FRONT IS 20"x8.5" AND REAR IS 20"X9.5

Offset: front IS +32mm AND REAR IS +35MM

was wondering if these offsets will fit my G without any modifications having to be made????
 
Reply
Old Aug 8, 2006 | 12:15 AM
  #2  
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member

SEARCH!!!!!!!!

This topic has been discussed so many times.

.



.


.


.


.
 
Reply
Old Aug 8, 2006 | 12:54 AM
  #3  
woshiagni's Avatar
Registered User
iTrader: (3)
Joined: Feb 2005
Posts: 362
Likes: 0
From: Southern Calif.
^^ yes... search...

there is no short answer. it depends on 1) if you lower your car 2) if you tend to carry backseat passengers a lot 3) what kind of roads you drive on and 4) what width/profile tires you install.

but to help you out, that width with those offsets will most likely rub unless you roll/cut your fenders and run stretched tires.
 
Reply
Old Aug 8, 2006 | 02:44 AM
  #4  
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member

....
....
....
....
if you roll your fenders
....
....
if you cut your fenders
....
....
Please search, I have posted in this same topic thread so many times and have not been a member for that long. I searched 50 times for each time I posted when I first became a member; maybe I expect too much from others.


Where is Cru? He would go off right now.
 
Reply
Old Aug 8, 2006 | 03:15 AM
  #5  
skeleton_cru's Avatar
Registered User
Joined: May 2002
Posts: 17,096
Likes: 12
From: East Bay, Cali
Sedan
Originally Posted by FriscoD415
Bolt Pattern: 5x114.3

Size: STAGGERED- FRONT IS 20"x8.5" AND REAR IS 20"X9.5

Offset: front IS +32mm AND REAR IS +35MM

was wondering if these offsets will fit my G without any modifications having to be made????
I'll answer 'cause he's from the Bay Area...

You will likely rub the front fenders and will definitely rub the rear fenders. You need bigger offsets. +38 front, +45 rear, especially if you lower your G.
 
Reply
Old Aug 8, 2006 | 12:15 PM
  #6  
az1anbeethoven's Avatar
Registered User
iTrader: (19)
Joined: Nov 2005
Posts: 3,316
Likes: 1
From: SOCAL 626
you will have a prob in the rear if you dont roll...
 
Reply
Old Aug 8, 2006 | 01:19 PM
  #7  
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member

Wow Cru, I was expecting some flaming.

Anyway, yes they will rub. The rears might fit if you cut/roll your fenders but they will be very close.
 
Reply

Trending Topics

Old Aug 8, 2006 | 02:21 PM
  #8  
codeflux's Avatar
Registered User
iTrader: (26)
Joined: May 2004
Posts: 4,105
Likes: 4
From: San Francisco, CA
no, this offset is too low. these wheels will not fit.

however, these will: https://g35driver.com/forums/archived-sales/106630-fs-19-volk-le37t-gunmetal-chrome-staggered-w-michelin-pilot-sport-tires.html

you know you want them. they'll be perfect.
 
Reply
Old Aug 8, 2006 | 11:43 PM
  #9  
skeleton_cru's Avatar
Registered User
Joined: May 2002
Posts: 17,096
Likes: 12
From: East Bay, Cali
Sedan
Originally Posted by ttrank
Wow Cru, I was expecting some flaming.
Gotta take care of my peeps from the Bay Area.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
obender66
18 Inch
1
Mar 13, 2016 12:20 PM
shavedcrx
20 Inch
2
Aug 7, 2015 04:14 AM
JaeXL
G35 Coupe V35 2003 - 07
4
Aug 4, 2015 07:43 AM
IEMaestro
20 Inch
0
Jul 30, 2015 04:30 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 07:54 AM.