Kinetix camber suspension arms?
#1
Kinetix camber suspension arms?
Anyone tried these yet on their G35 coupe? Saw them on ebay,
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2440500256
Searched this forum and didn't come up with anything. Seems like some people on www.my350z.com have been using them and are happy with them. Only $219 compared to $440 for the stillen kit. Anyone tried them?
-Alan
133608-kinetix.jpg
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2440500256
Searched this forum and didn't come up with anything. Seems like some people on www.my350z.com have been using them and are happy with them. Only $219 compared to $440 for the stillen kit. Anyone tried them?
-Alan
133608-kinetix.jpg
#2
Re: Kinetix camber suspension arms?
Kinetix ='s LSDunique on my350Z.com
I have them on the car, great product. The part that goes on the suspension closest to the outside of the car was to tight. I simply unscrewed that part and put it in a vise and bent them out a bit, no biggie. I also bought the traction arms but have yet to install them.
6mt sed
Crawford Pleneum
Injen CAI
Cusco sway bars
350Z springs&struts
Custom true dual exhaust
Nismo header (soon)
I have them on the car, great product. The part that goes on the suspension closest to the outside of the car was to tight. I simply unscrewed that part and put it in a vise and bent them out a bit, no biggie. I also bought the traction arms but have yet to install them.
6mt sed
Crawford Pleneum
Injen CAI
Cusco sway bars
350Z springs&struts
Custom true dual exhaust
Nismo header (soon)
#3
Re: Kinetix camber suspension arms?
Thanks for the info. I'm guessing that your car is lowered, were you able to get the camber back within spec or better? I know the stock offset for the rear camber is aggressive. I would like to zero the camber out or at least improve it to increase tire life.
-Alan
-Alan
#4
Re: Kinetix camber suspension arms?
Yes it's lowered, I have the 350Z suspension and that lowered my sedan. Honestly, I haven't taken it to the shop yet, I'm waiting to put on the traction arms and then I'll have to intall my stock 17" rims as the shops machine can't do my 18"'s.
I'm going to use 1 degree of negitive camber in the rear. Not sure how I might set the toe. I toyed with the arms before install and they have a pretty broad adjustment range.
6mt sed
Crawford Pleneum
Injen CAI
Cusco sway bars
350Z springs&struts
Custom true dual exhaust
Nismo header (soon)
I'm going to use 1 degree of negitive camber in the rear. Not sure how I might set the toe. I toyed with the arms before install and they have a pretty broad adjustment range.
6mt sed
Crawford Pleneum
Injen CAI
Cusco sway bars
350Z springs&struts
Custom true dual exhaust
Nismo header (soon)
#5
#6
Re: Kinetix camber suspension arms?
i have these also, great product for the money, couldnt get one of the rears to spec camber without causing toe issues which the traction bars may or may not help, but mine is lowered with 19s and they really helped a lot.
03 BS/Graph 6MT Prem Cp
19" Gunny TE37 275/30 MichPSports
kg/mm springs
camber rods
injen
Alpine/JL/Stinger
double din
03 BS/Graph 6MT Prem Cp
19" Gunny TE37 275/30 MichPSports
kg/mm springs
camber rods
injen
Alpine/JL/Stinger
double din
Thread
Thread Starter
Forum
Replies
Last Post