20" iforged w/ eibach lowering springs
20" iforged w/ eibach lowering springs
Just installed 20" iforged rims. Rear tires 275/35/20's. The car is lowered w/ eibachs. I'm trying to avoid raising the car back up with the stock springs. The tires are rubbing, I'm entertaining rolling or cutting the fender lip. Any comments or suggestions.
Re: 20" iforged w/ eibach lowering springs
Yeah I've notice the offsets are pretty aggressive on my iforged wheels. If I lower my car even more I would probably rub. I would roll the fenders if I were you or get some coilovers.
2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79
2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79
Re: 20" iforged w/ eibach lowering springs
I paid 2600 for mine. I drove hard tonight on the corners and my rear tires rub on extreme turns. I guess I have to roll my fenders as well.
2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79
2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79
Re: 20" iforged w/ eibach lowering springs
2600 is a rediculously low price for those rims...how did you get them for so little? also, can you remember what your front and rear offsets are? when the tires rub, is it only on the rear, and on the outside?
Re: 20" iforged w/ eibach lowering springs
My350z.com group buy section. I don't know the offsets, vince did them for me. It on;y rubs on the driver side rear because it's .4 of inch lower then the passenger side.
2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79
2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79
Re: 20" iforged w/ eibach lowering springs
Brusso, the wheel sidewall is too high. You should be using a 275/30/20 instead. the 35 series sidewall is too tall in your application.
Trending Topics
Re: 20" iforged w/ eibach lowering springs
thanks for the replys. Here are some answers. I paid $2700 w/ nittos. I know it's an amazing price. I rolled the fender lips a few days ago. I used a rupper mallet and lightly tapped on the fender lips for about 15 minutes on each side. I was able to bring the lip up to a 45 degree angle. I have about 200 miles on the car with no rubbing. I haven't had layed into any corners yet to see if it hits under extreme conditions, I'll let you know. The camber is still off from lowering the car, I'm going to have the camber kit installed next week when my ATI Procharger is being installed (oh yeah).
Re: 20" iforged w/ eibach lowering springs
alot of people use a baseball bat wedged against the tire an fender. then you roll the bat along the arch. It make a very clean fender roll.
Jim
'03 Sedan
Brilliant Silver/Graphite
6MT/ Premium package
Sport tuned suspension
Aerodynamic Body Kit
Navigation and Satellite Radio
Jim
'03 Sedan
Brilliant Silver/Graphite
6MT/ Premium package
Sport tuned suspension
Aerodynamic Body Kit
Navigation and Satellite Radio
Re: 20" iforged w/ eibach lowering springs
Re: 20" iforged w/ eibach lowering springs
well I got my alignment and now my tire don't rub. The toe was servere from lowering my car.

2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79

2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79


