Anyone ever install the Eibach Pro Kit front end springs before? If you have, is it hard to do?

Or, does anyone recommend a shop that can do it for a good price in the Bay Area- East bay?

Any info is greatly appreciated. Thanks my peeps!
G35Papa

 

OOPS.........my above post would be for the Sedan and not the coupe. Although they may be the same type of install, I just wanted to get the right info incase there is a difference between the two.

Thanks again. THE PEOPLE ON THIS SITE KICKS A$$!

 

Not sure about the East bay area... but I got my mine done in SoCal b Vision Autosports. For the sedan, you want Eibach Pro-Kit Springs (#6363.140).

-Ted


'03 Sedan 5a: BS/G, Prem, Aero/Body, Sport, Nav
Click for MODS or Vote at Online Showoff

 

installation of springs in our G is very easy. especially the rear springs. cost of installation should not exceed more than $50.

Friends don't let friends drive stock

 

I dunno. It'll take a good shop a couple of hours to replace all four springs. You certainly should NOT just replace the front two. Probably looking at $100 for the install.

--Steve

 

So I should replace the rears too, even if I dont want a drop in the back? Is there a way to get around not dropping the back but replacing them with new springs from the Eibach kit?

I will call around and ask for prices and use your estimates as a cost figure. Thanks for that.

 

I personally would replace both or neither but that's just me. What's the problem with replacing the back? The Eibach kit will reduce the front slightly more than the back, BTW.

--Steve

 

besides, the kit comes with 4 springs.... you can't buy just two.

Go for all four...and don't forget to get your alignment within a week or two.

-T

'03 Sedan 5a: BS/G, Prem, Aero/Body, Sport, Nav
Click for MODS or Vote at Online Showoff

 

I have a set for sale. VERY CHEAP too! PM me if you are interested.

- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-

 

Im convinced! All 4 or nothing! :-)

Ive also decided to do it myself. Wish my luck my peeps.
I will post my install experience once I get a hold of a some and actually do the work.

Thanks for all the great advice as usual!
HOLLA!
G35Papa

 

What would be the difference between Eibach and Sprint springs?