Planning on buying some one piece forged wheels by ccw for my mt coupe. Running 19x8.5 and 19x10. 2 inch lip in the front and 3-4 in the back. Just wanted to know the best offsets or what people are running. Any advice would be appreciated. Dont really know too much about offsets but i dont want my wheels to stick out.

 

If you want to run a 19x10" in the rear, then you'll want to look into rims with a +30 offset or maybe a +29 (depending on wheel), as for the 19x8.5" front, +25 offset would work out well.....



"See, the problem is that God gives men a brain and a *****, but only enough blood to run one at a time."

 

ducatiguy knows from what he speaks. Those would be my recommendations also.

Lou

 

My 19x8 F are +25 offset (Brembo clearance) w/245/35/19 - the rears are 19x10 have +30 offset w/285/35/19. My car has stock suspension at present - no rubbing, but I haven't pushed the car very hard yet. I don't expect the tires to rub under hard conditions, but, like I said, I haven't pushed the car very hard with this setup yet to confirm this. Hope this helps.

<font color=blue>2003.5 G35 Coupe 6MT
CB/Graphite/Prem/Aero
19" BC Forged Custom BC06s
Clear Corners/Tint
Alum Pedals
Zaino!</font color=blue>

 

thanks for the reply guys.