rear ir rubbing!!!!
Originally Posted by MPK1232
i have 285 rears +18 offset on stock suspension and i rubbed a lot. i had my rear fenders rolled & now im fine, no rubbing issues at all. but there is no way i can lower the darn thing with those fat tires. now im just waiting for my rear tires to wear out and get 275/30's before i can think of lowering my car. it doesnt look like you have an aggresive offset so you probably can either choose between a smaller tire or to roll your fenders.
Originally Posted by redlude97
Only way to stop the rubbing in the rear properly is to get the rear fenders rolled. Putting on lowering springs is only going to make things worse
the wheels and get off-sets that would work better with your car....roll the
fenders!
put on a 15mm spacer .. slam it 4 inches .. stretch the tires down to two sizes smaller and put the camber at -2 degrees
jk =)
roll the fenders or cut them (suggest rolling)
SPC rear camber with toe bolts .. a lil negative camber
jk =)
roll the fenders or cut them (suggest rolling)
SPC rear camber with toe bolts .. a lil negative camber
Thread
Thread Starter
Forum
Replies
Last Post
yosip1115
The G-Spot
6
Aug 20, 2015 10:30 PM
pigpen infiniti
G35 Sedan V35 2003-06
2
Aug 16, 2015 09:07 PM




