Rears: 19x10.5 +10ET
Fronts: 19x8.5 +25ET

will this offset fit? the rims are falken 80-90% thread left. its staggered. black. chrome lip deep dish. and its selling for 900$. will it fit though? and is it worth it?

 

and another question..everytime i start up my car. it starts up really weak...could it b the battery? bcuz i was running indiglow and it was plugged into the lighter port..could that b the reason? sometimes..when i try to start my car. it starts up really weak and shuts off and i gotta do it again. but regardless, it starts up really fkn weak

 

The backs WILL require a fender roll and quite a bit of negative camber to fit. You'll likely have to use a 275/35/19 also

 

****..how much more would i b spending?

 

prolly $150 or ~2 hrs of labor for a good fender roll without any paint cracking or chipping. just save for another set of rims and tires.

 

most places charge about 40-60 per corner for fender rolling/shaving

 

would touch up paint be good enough for paint chips from fender rolling?

 

I wouldn't trust it if its significant chipping. I would sand down the area, mask and respray, but if they are pretty small you might be okay

 

the rears will be close even with a fender roll...def need to run neg camber and anything over 275 width is out of the question. the fronts will be fine.