Tein H-tech springs and GS-D3's (pics)
#1
Tein H-tech springs and GS-D3's (pics)
http://forums.freshalloy.com/ubbthre...b=5&o=&fpart=1
DG/G 6MT coupe, Borla exhaust, Stillen intake, Z aluminum pedals, clear corners
DG/G 6MT coupe, Borla exhaust, Stillen intake, Z aluminum pedals, clear corners
#2
#3
#4
Re: Tein H-tech springs and GS-D3's (pics)
H-Tech drop is .6"/.3" and S-Tech is 1.2"/.9". The S-Techs should be very similar to the Eibachs, as far as I know there aren't many complaints about either. If you do a search you can find more info about both Eibachs and Teins - IMO you can't go wrong with either if you don't mind a progessive spring.
DG/G 6MT coupe, Borla exhaust, Stillen intake, Z aluminum pedals, clear corners
DG/G 6MT coupe, Borla exhaust, Stillen intake, Z aluminum pedals, clear corners
#5
Re: Tein H-tech springs and GS-D3's (pics)
What do you mean by progressive spring?
The H. Tech only drops it .6/.3? Is it noticeable? It seems like I woudlnt even notice the drop in the rear. Why didnt you get the S. Tech?
Twilight Blue G35 Coupe 6MT
Premium - Nav - Aero - Trunk Mat
Injen CAI
The H. Tech only drops it .6/.3? Is it noticeable? It seems like I woudlnt even notice the drop in the rear. Why didnt you get the S. Tech?
Twilight Blue G35 Coupe 6MT
Premium - Nav - Aero - Trunk Mat
Injen CAI
#6
Re: Tein H-tech springs and GS-D3's (pics)
Its noticable but its subtle at the same time. This is the first time I have put lowering springs on a car, and I wanted to avoid going too low for my taste. If you want a very noticable drop go for the S-Techs or Eibachs. However, if you drop it 1" or more there is a very good possibility you will have camber problems and won't get it aligned within spec, although you can probably get it close.
I am no expert on spring rates, but I believe a progressive spring has softer initial rates and increases in stiffness as the spring compresses. The stock springs are linear so the rate is fixed. Most aftermarket springs are progressive with RS*R being an exception. If you are going to track your car you might want to stick with linear springs and the RS*R's have been getting good reviews - drop is .6"/.6".
DG/G 6MT coupe, Borla exhaust, Stillen intake, Z aluminum pedals, clear corners
I am no expert on spring rates, but I believe a progressive spring has softer initial rates and increases in stiffness as the spring compresses. The stock springs are linear so the rate is fixed. Most aftermarket springs are progressive with RS*R being an exception. If you are going to track your car you might want to stick with linear springs and the RS*R's have been getting good reviews - drop is .6"/.6".
DG/G 6MT coupe, Borla exhaust, Stillen intake, Z aluminum pedals, clear corners
#7
Trending Topics
#8
Registered User
iTrader: (1)
Join Date: Apr 2003
Location: USA
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tein H-tech springs and GS-D3's (pics)
<blockquote><font class="small">In reply to:</font><hr>
Most aftermarket springs are progressive with RS*R being an exception. If you are going to track your car you might want to stick with linear springs and the RS*R's have been getting good reviews - drop is .6"/.6".
<hr></blockquote> I always thought the 350z RS*R's were linear both f/r too. However, it appears we were only 1/2 correct. The following comments were made by Koji Ikeda, RS*R Director of Sales and Marketing here on 3/10/04.<blockquote><font class="small">In reply to:</font><hr>
Thanks again for all the comments. The 350Z spring is as follows:
Front Spring - Progressive Design.
Rear Spring - Linear Design.
Why the difference? RS*R spring designers have spent a considerable amount of time between different designs for the springs. When all is said and done, this design; drop, spring rate, linear vs. progressive, netted the best spring design for what RS*R lowering kits stand for.
The G35 springs are progressive for both front and rear. The engineers at RS*R have done a fantastic [job] creating two springs that compliment the specific cars very nicely.
RS*R G35 Downsprings
Drop: 1.0" front / 1.2" rear
Spring Rate: 315 front / 315 rear
MSRP $329
Remember, we have both the 350Z and G35 springs.
350z Part #: 30-N200 (down spring) 32-N200 (Ti2000)
G35 Part #: 30-N400 (down spring) 32-N400 (Ti2000)
<hr></blockquote> So, it appears that there are now two very different downspring options from RS*R for G35 coupe owners to consider! Got 4 myself, but hope this helps out the 2drs.
2004 | 6MTs | Diamond Graphite/Graphite
Upstate NY
Most aftermarket springs are progressive with RS*R being an exception. If you are going to track your car you might want to stick with linear springs and the RS*R's have been getting good reviews - drop is .6"/.6".
<hr></blockquote> I always thought the 350z RS*R's were linear both f/r too. However, it appears we were only 1/2 correct. The following comments were made by Koji Ikeda, RS*R Director of Sales and Marketing here on 3/10/04.<blockquote><font class="small">In reply to:</font><hr>
Thanks again for all the comments. The 350Z spring is as follows:
Front Spring - Progressive Design.
Rear Spring - Linear Design.
Why the difference? RS*R spring designers have spent a considerable amount of time between different designs for the springs. When all is said and done, this design; drop, spring rate, linear vs. progressive, netted the best spring design for what RS*R lowering kits stand for.
The G35 springs are progressive for both front and rear. The engineers at RS*R have done a fantastic [job] creating two springs that compliment the specific cars very nicely.
RS*R G35 Downsprings
Drop: 1.0" front / 1.2" rear
Spring Rate: 315 front / 315 rear
MSRP $329
Remember, we have both the 350Z and G35 springs.
350z Part #: 30-N200 (down spring) 32-N200 (Ti2000)
G35 Part #: 30-N400 (down spring) 32-N400 (Ti2000)
<hr></blockquote> So, it appears that there are now two very different downspring options from RS*R for G35 coupe owners to consider! Got 4 myself, but hope this helps out the 2drs.
2004 | 6MTs | Diamond Graphite/Graphite
Upstate NY
Thread
Thread Starter
Forum
Replies
Last Post