my buddie has some work vs-xx at his shop that he removed from a widebody 240sx. the fronts are 19x10 with 275/35/19 and the rear are 19x11 with 295/35/19 all 4 wheels are ZERO offset... my friend is owes me like 900 bucks and he's just giving em to me to settle the debt.

so my question, what would i need to do for these to fit??? roll? cut? widebody?
would they stick out too much?

if it doesn't work out.... i'll just end up selling them.

 

haha, that's a pretty low offset for any stock body.

10" 0 offset compared to the less aggressive Volk 9.5" +22 is 28mm further out.
11" 0 offset compared to the less aggressive Volk 10.5" +22 is 28mm further out.

 

Those will not fit without some serious camber and a fender pull. My friend is going to be running 19x11+17 with a 285/35/19 and his fenders are already rolled and we are aiming for -2 to -2.5 camber in th rear. You'll likely be looking at -3.5 camber at the very least

 

whoa hella low...he is giving you those to offset 900 dollars...damn uhmm lemme pick those up from you haha

 

have fun with that one.

 

275 fronts? that's gonna be interesting

 

these will fit with the right combo of camber,tire strech,ride height and fender mods...

 

In your combo above, you forgot "the right car" as well

 

haha go for it man. would be interesting to see what you can do with them

 

yup. you slam the car and give those babies some -4 camber!! then you can post in the thread I made of aggressive setups