i just order 20 inch rims for my 05 g35 coupe. I plan on putting 30 profile tires on the front and back to go with the rims. The one question i have is how low should i plan on lowering my car? I don't want that gap to occur from the car to the wheels....

 

I have 20's

I am running 245/35 up front and 285/30 in the rear with tanabe springs..

a total of about a 1.7 in drop all the way around the car

check out my pics

https://g35driver.com/forums/picture-share/201350-my-cb-coupe-rollin-gold-s22-s.html

no rubbing except under hard corning....

 

Yea i was thinking lowering it about 1.2 in the fornt and 1.1 in rear with the eibach lowerin coils, but like i said dont want a gap to happen becasue of the new rims...
i live in chicago so i would have to take them off every nov. so loweirng 1.7 the car could be to much when i go back to 18's

 

350z H-techs

 

Thos are nice as hell, how much did those cost you>?

 

how much did what cost me????

 

yea

 

probably the springs since that is the subject we are on.

 

the springs also and rims also check this out these are the rims i bought what you guys think???

 

this is where I got my springs

http://optionimports.com/tnf063-48.html

also I have about 1600 into my wheels and tires...

got the rims from a guy off Z forum brand new and tires from a couple diffrent forums....

luckily it was winter so I had plenty of time to sit and wait for good prices...

 

you think if i get the sevas s22 and drop them on the tanabe df210 their will be issues?

 

No I don't think so at all the DF210's are rated at 1.7 - Front 1.3 in the rear

I got the NF210 for the 350Z which are 1.2 all the way around the add another .5 drop for putting Z spring on a G... last I measured I was around 1.6in drop on all 4 corners and I have no issues...