I bought this adapter from "www.eastwood.com". Lot of neat stuff.
The adapter is a little long, so I cut it to the size of our jack that comes with the car.



237151-scan.jpg

 

Great find! Thanks.

Russ

Black 6MT Coupe
Jax, FL
PS2 and Headrest Monitors Thread

 

just orderd mine, Thanks!

-----------------------------------------------------------------------

 

Just got it today, Damn like Next day. It is to long and needs to be cut. I also have to mod it a bit so it will bolt onto my old sears Jack. Should do the trick once im done hacking it apart

-----------------------------------------------------------------------

 

That's what I did. I cut mine to the same length as our stock oem jack that is in our trunk. Just measured it, clamped it to a table vise, and cut off the extras from the two sides with a hack saw. As far as fitting in the saddle, mine fitted without the larger adapter piece.
Hope your fit after "hacking"!!!!!

 

so what did you use for jack stands?

2003 G35 Coupe 6mt Diamond Graphite
AIM= bkchang79

 

Hey resurrecting this old thread, to ask for a fresh link to this product, the image and link r dead =}

thanks

 

http://www.eastwoodco.com/shopping/p...ProductID=2061

This may be the one???

 

That's the one. Mine eventually collapsed..or bent inwards from repeated use. Obviously its because i had to cut it down to fit in that small gap in the stock side skirts. I may end up trying to make my own using the hockey puck method or a block of wood.

 

I just ended up using a block of wood. cheaper and replaceble.

 

yeh, i just cut a piece of oak and use that.

 

thread from the dead