I've been floating around on the forum finding very good information regarding my RWD 06 sedan and for those of you who have been informitive I thank you. Another question for those of you with the knowledge, Rims...I've been eyeing these Rims from a company name Tork and have come to the conclusion that I will be purchasing 19"s. I've settled for the staggered look but I'm going to be conservitive with it. If I have this right when it comes to the offset, the higher the number the less the wheels stick out? well with the tork wheels I figured if the front wheels have an offset of 30 and the rear has an offset of 40 then I should be okay in regards to the rubbing issue as long as I place a camber kit on the rear and go with a decent set of lowering springs. For tires I was thinking 275/35/19 for the back and 245/35/19 for the front. I would like a little stretching but nothing exaggerated. I would like to know the opinions of what the community thinks with my idea, I am pretty set upon this operation but if anyone knows of any cost effective angles that I could consider. Plus if I'm forgetting anything needing to make my creation work and get a hand clap or two then please shoot me your ideas.

 

that's correct

 

my g35 is lowered 1 1/4" and it rubs with 20x8.5 but not by 20x7.5 i had 7.5 but rims cracked on pot hole and now have 8.5 (not knowing they would rub) and they rub like crazy on the back so i got cushions to raise it on the back and its hard to find a good looking 20x7.5 so i am going down to 19x7.5. and the tires i have now are 245/35/20