what size spacers should i get?
Joined: Dec 2006
Posts: 2,007
Likes: 7
From: San Jose
what size spacers should i get?
Im looking to get spacers to make my wheels sit more aggressively, currently my setup is
axis pentas
20x9 +25mm front (245/35/20)
20x10 +25mm rear (275/30/20)
dropped on 350z h-techs, going to do springmount mod in the rear.
currently do not have a camber kit and am hoping to avoid it, even with springmount.
what size spacers should i get? and will i need fenders rolled?
here are some pics of what it looks like right now
axis pentas
20x9 +25mm front (245/35/20)
20x10 +25mm rear (275/30/20)
dropped on 350z h-techs, going to do springmount mod in the rear.
currently do not have a camber kit and am hoping to avoid it, even with springmount.
what size spacers should i get? and will i need fenders rolled?
here are some pics of what it looks like right now
I have PIAA super Rozzas in the same offsets that you do, and im gonna get 15 front and 10 rear. Although i am dropped much lower than you are. Youcan prolly do a good 15 all around. Your call
Joined: Dec 2006
Posts: 2,007
Likes: 7
From: San Jose
Originally Posted by Sbeck
I have PIAA super Rozzas in the same offsets that you do, and im gonna get 15 front and 10 rear. Although i am dropped much lower than you are. Youcan prolly do a good 15 all around. Your call
I am all the way down in the back on my coils and even lower in the front. I dont have a front camber kit although i have a rear one. So i am running camber in the front which will allow me to put bigger spacers.
I would go 20mm all around with rolled fenders for a almost flush fitment with no rubbing issues, and 25mm all around if you want to push it a little bit. I am 90% certain the 25mm will clear without rubbing, but without seeing this actual fitment before, it will be close.
