will this set up cause any problems? ill be adding a rear camber kit and will prob be having my fenders cut to avoid rubbing, just wanted to make sure if they would clear

 

you will likely not need to roll/cut your fenders with that setup. Should look pretty clean once you are done

 

holy-lightning-fast-reply batman!!! thanks, i've read a lot about spacers but not a lot of people do them with drops. will post pics once i do it

Dan

 

this is the exact same stance I am looking at.
what spacers are you going with?

 

Ichiba V2s

 

are those the style that bolt on to the hub?

 

yes the second ones on this link:

https://g35driver.com/forums/suspens...-5mm-25mm.html

 

My buddy is running my 350z s techs with Sf challenges +23 and 275's in the rear and he rubs on bumps. He needs to roll his fender for sure.

 

OP, you shouldn't have any problems... but jlin615 had OEM 19s, 20mm/25mm spacers, & z h-techs, and he said he rubbed a tiny bit in the back when he was doing some aggressive driving... but that may have been with a full tank of gas, he said.

just letting you know.
can't wait to see your ride after you put in all that stuff, though!

 

^^ thanks, im pretty excited about it myself... hopefully he's fatter than i am and i wont have to cut/roll

 

so, i got it done yesterday and i really really like the stance now!

the spacers made such a huge change, i think my tires are as close to flush as you can get, im very happy

I did however have to cut the fenders, after install i only had about a 1-1.5" gap (before they settle) so i felt that while i was at it i might as well do it.

Im at work right now so i cant post pics but will be posting some on sunday

Dan

 

Awesome..i just installed the spacers a couple days ago and getting 350z stechs in a couple of days. Did you install the springs yourself?? if not how much did you pay if you don't mind me asking.

 

here are some pics, i suck at posting pics so ill post these 2 small ones to show the difference in the rear


hers is the link to the rest of the pics:

http://s477.photobucket.com/albums/r...carpio_photos/

initial driving impressions were that they felt a little soft but have def. firmed up some, feels very close to stock now and cant stop looking at my car!! time to get the rims powdercoated, K Z front bumper and impulse sides

 

so even the Z stechs feel stockish?

thats no good for me, I want something kinda stiff.

 

im thinkin bout the 20mm up front and 25 mm spacers in back.
will have to go out to ucf n see how they look on urs.
so the 350z s-techs didnt stiffen u up a bit?
i hate my g s-techs but i got em for $50 so I cant complain.