I don't think so. I'm going to roll and flare the fenders when the car goes in for paint.

 

rears at -1 offset:

 

damn that looks like sex!

those are...

255/35/19 on a 19x10.5?

 

berry berry nice!!!

 

Sick pat. wondering if you can help me out? I have 10.5 + 24 in rear and I'll e adding a 25mm in the weekend. I don't have my fenders rolled yet, do you think I'll rub on a 275/30? I'm dropped on s techs for Z and did springmount mod cut about an inch, and pinky barely fits. I'll also be getting a a 245 in a couple of weeks.

 

Nice Pat! This looks great!

 

thx, and yes


thx Shane

I think you might rub on the edge of your tires (on the actual tread and not sidewall) on bumps since you don't have your fenders rolled... also what is your camber at?

 

Idk Bro. I haven't gotten an alignment yet.how can I know how much neg camber I have? and dial a couple more in if needed?

 

^You are going to rub crazy with a 275 and a -1 offset on 10.5, you're gonna need a SUPER flat roll and a very minor pull unless you dont mind running camber

Roll the fenders get your tires, THEN get alignment!!!BTW LMK whats up with the roll. I got a good amount of time this week!!!

 

Looks sick!

 

Agh crap:/ I'm cool with the roll but pull? Idk. Umm would it be significantly less bad with the 245? And I'll let u know bro by Fri. I work all this week except for Fri so hopefully by then! The max neg camber I wanna run is prob -4!

 

Nice stance Pat! Car is lookin sick.

Good choice on the license plate frame!

 

When i say a slight pull i mean very slight that you wont even notice really. Also everything comes into play when you want that perfect fitment. Either pick a tire size you want with that offset, or a camber setting you want, then you can go from there. With a 245 you will only need about -2.5 camber. The wider you go the more camber you will have to add to compensate for the larger size.
Friday may not work but if thats the soonest i can do it sunday afternoon!

 

HOLY ****!

That is SICKNESS!!!!

 

question, guys how do you come up with a +4 when you add spacers. what formula do you all use...................... I am thinking of adding spacers to my coupe but having touble figuring out what spacer to get. I have T1s +24 upfront and +29 in the rears.