Hate to be a noob but ... need RPF1 wheel/tire size confirmation for 04 Sedan
#31
The reason why I want to run some stretch is to get a more aggressive wheel. I want to have a deeper lip. The speedo will maybe be off by 1-2 mph so I dont care about that.
Plus you more choices in tires. If you look at the tire for a 235-40 not many choices.
So Grant I am thinking a 19x10 +35 or 30 in the rear. I have a mild roll on my car since the paint started cracking. I am hoping my buddy can roll alittle more and maybe pull without cracking the paint more. Or maybe I should get camber arms and run more camber.
Will this work with a 255, I have a feeling you are going to say yes.
Plus you more choices in tires. If you look at the tire for a 235-40 not many choices.
So Grant I am thinking a 19x10 +35 or 30 in the rear. I have a mild roll on my car since the paint started cracking. I am hoping my buddy can roll alittle more and maybe pull without cracking the paint more. Or maybe I should get camber arms and run more camber.
Will this work with a 255, I have a feeling you are going to say yes.
#32
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach
The reason why I want to run some stretch is to get a more aggressive wheel. I want to have a deeper lip. The speedo will maybe be off by 1-2 mph so I dont care about that.
Plus you more choices in tires. If you look at the tire for a 235-40 not many choices.
So Grant I am thinking a 19x10 +35 or 30 in the rear. I have a mild roll on my car since the paint started cracking. I am hoping my buddy can roll alittle more and maybe pull without cracking the paint more. Or maybe I should get camber arms and run more camber.
Will this work with a 255, I have a feeling you are going to say yes.
Plus you more choices in tires. If you look at the tire for a 235-40 not many choices.
So Grant I am thinking a 19x10 +35 or 30 in the rear. I have a mild roll on my car since the paint started cracking. I am hoping my buddy can roll alittle more and maybe pull without cracking the paint more. Or maybe I should get camber arms and run more camber.
Will this work with a 255, I have a feeling you are going to say yes.
-GP-
#33
Thread
Thread Starter
Forum
Replies
Last Post
marsman328
Northern California
1
08-11-2015 07:29 PM