i just got 20" msr staggered wheels and when i hit the highway going around 60-80 my steering wheels shakes....its really annoying. can anybody help with what i need to do.

 

did you make sure the lugnuts are torqued to spec? also you after putting on lug nuts, you're supposed to re torque after 100 miles. its happend to two people i know.

 

Has it been balanced correctly ?

Wheel bent?

 

Have they installed locating rings?

 

sounds like you need hubcentric rings

 

+1 on hubcentric rings

 

well i just put the wheels on today but i will def. get my wheels rebalanced. also.. where do i get these hub rings at?

 

some wheel shops and most tuner shops will have hubcentric rings. you can also buy them from the vendors in the marketplace.

 

^^^just be sure to buy the right size rings...and if u need spacers, sum of them come w/ hub rings too..g/l man and be careful driving

 

Had that problem when i first got wheels for my old car. Good luck man...

 

Did u get wheel alignment..

 

no i didnt think it was neccessary. but i will look in to it. thanks for all the help

 

YVW

 

Some jerks installed my hubcentic rings on backward and the car was undrivable at 20 mph. I had to turn around and have them re mount the wheels. So if you need hubcentric rings, you should notice it at all speeds, not just above 60 mph. Sounds like a wheel balance issue.

 

^ Geez man, sounds like you had a bad wheel guy. I don't even think you can get a wheel to sit flush to the hub if your hubcentric rings are backwards!

Anyway, you'll notice vibration at all speeds, however, its MUCH more noticeable after you get above 50mph. Moreover, if the OP isn't running hubcentric rings then he needs to do it anyway.