looking to put 20x8.5 and 20x10 both with a 35 offset on my 04 sedan. is thaat going to be pushed out of the fenders or sucked in quite a bit? i did search. couldnt find a straight forward answer. and i will be lowered roughly 1-2 inches

 

I believe it should sit sorta flush.. you can buy my sevas and they will fit flush on your sedan same sizes but +25 offsets

 

how will both a 25 and 35 sit flush. wont the 35 be tucked in by 10mm compared to the 25 offset that you have? can you post a picture of how your sevas sit on a sedan please.

 

I think these are the same offsets as mine, they are pretty flush

 

so then a 35 will sit tucked in a little?

 

^ I believe so

 

The only way he is going to get that to fit is to roll his fenders flat and a slight pull and most likely have to stretch a 255 or 245 on the rear.

 

how will a 35 need to be stretched that much? it should sit in farther than a 25 offset

 

No a +35 will sit in more "tucked" then a +25

 

it all depends on ur drop

 

yea thats what i meant by sit in farther. so what will i need on a 20x10? a 42-45?

 

That will sit in even further. The lower the number the more it come closer to the fender.

 

well i would rather it sit inside the fender a little than be outside the fender a little

 

tuck ftl jk jk

youll be alrite man!

 

id just rather run a really meaty tire in the back with a little bulge than have a stretched tire