Heard of WedsSport Wheels?
#16
#17
Registered User
iTrader: (15)
With +12 on 10.5 all around??? That'd be a tough one without any fender pulls or mods. And prepare to put some negative cambers on.
I have Pirelli 275s (same as 285s for most other tires because of their side wall design) in the back on 10.5s with +35 and was very slightly rubbing with -2.0 degrees of camber. Now I have -2.5 and not rubbing at all. IMO, I could have probably gotten away with -2.2. Also, I have 255s on my 9.5 with +37 offset in the front with rubbing at full steering lock at -2.0 degrees of camber. I'm planning on slight fender mods in the future to correct this as well.
I'd say go for it after some fender pulls or slight cut from a professional body shop.
I have Pirelli 275s (same as 285s for most other tires because of their side wall design) in the back on 10.5s with +35 and was very slightly rubbing with -2.0 degrees of camber. Now I have -2.5 and not rubbing at all. IMO, I could have probably gotten away with -2.2. Also, I have 255s on my 9.5 with +37 offset in the front with rubbing at full steering lock at -2.0 degrees of camber. I'm planning on slight fender mods in the future to correct this as well.
I'd say go for it after some fender pulls or slight cut from a professional body shop.
Last edited by B L U E S L A T E; 12-29-2009 at 12:12 PM.
#19
#20
I saw these online and they are pretty sweet looking concave wheels with low offsets and relatively cheap. Wondering if anyone has a set or if our vendors would sell them at a lower price than this site?
http://www.evasivemotorsports.com/Me...18105-511412TS
This is the TC105N Version
and here's the SA-67R
http://www.evasivemotorsports.com/Me...18105-511412TS
This is the TC105N Version
and here's the SA-67R
Really good prices on wed sport wheels.
#21
#22
#25
#26
either way, they are a better price and cheaper shipping and I've actually seen their shop in person.. did you click on the 18x 10.5? its like $525 with $10 shipping per wheel.
#28
#30
^ yea thanks I think I'm going to choose enkei RPF1 in 18X10.5+15 instead of these b/c of the huge price difference. Anyone heard bad things about the enkeis? I assume they use the same process and should be of similar quality, but the enkeis are 1200-1400 rather than 2100-2400
love the RPF1